Zoom F4 Operation Manual page 143

Conducting a full test
5.
Use e to select Full Test,
and press E.
The amount of time required for
the full test will be shown.
6.
Use e to select "Yes", and
press E.
7.
The test completes.
The result of the evaluation will
be shown. If the access rate MAX
reaches 100%, the card will fail
(NG).
8.
Press m to cancel the test.
NOTE
p
• You can press
• Even if a performance test result is "OK", there is no guar-
antee that writing errors will not occur. This information is
just to provide guidance.
F
Multi Track Field Recorder
to pause and resume the test.
143