Adjusting Connected Equipment Levels (Playing Test Tones) - Zoom F1 Operation Manual

Adjusting connected equipment levels (playing test tones)

Use the test tone in order to adjust the level of a digital SLR camera or other device connected to the
1.
Turn down the input gain of the other device.
NOTE
If the automatic gain control function on the other device is on, turn it off.
2.
Use an audio cable to connect the external mic jack of the other device with the PHONE OUT jack of the
.
3.
While pressing
This plays a test tone from the PHONE OUT jack.
NOTE
Be mindful of the volume if you are monitoring the sound with headphones, for example.
HINT
The test tone is a 1kHz sine wave at -6 dBFS.
, press .
26
.