Setting The Threshold; Setting The Attack Time - Zoom F4 Operation Manual

Setting the threshold

This sets the base level from which the limiter operates.
5.
Use e to select Threshold
and press E.
6.
Use e to adjust the set-
ting, and press m.
HINT
This can be set from −16 to −2 dBFS.

Setting the attack time

This sets the amount of time until compression starts after
the input signal exceeds the threshold.
5.
Use e to select Attack
Time, and press E.
6.
Use e to adjust the time,
and press m.
HINT
This can be set from 1 to 4 ms.
F
Multi Track Field Recorder
77