Adjusting the input signal monitoring balance
You can adjust the volume of each input signal when monitoring.
1.
Open the mixer on the Home
Screen. (→ P .11)
2.
Use
to adjust the faders.
HINT
• The fader setting range is muted, and –48.0 to +24.0 dB.
• You can turn
to move the cursor, and also adjust the settings
of the MAIN OUT 1/2 and SUB OUT 1/2 signals. (→ P .116)
NOTE
• The MAIN OUT 1/2 and SUB OUT 1/2 faders do not affect the
levels of the slate mic and slate tone.
• These volume settings only affect the monitoring signals. They
have no effect on recorded data.
• Settings are saved separately for each take that is already
recorded and can be changed during playback. (→ P .52)
• Mix settings are not saved with the take when the recorded file
format is MP3.
F8n
Multi Track Field Recorder
75