Advertisement
6. Click the Driver tab; then, click Update Driver. The Update Device Driver Wizard
7. Click Next.
8. Verify that Display a list of the known drivers... is checked; then, click Next.
9. Click Have Disk.
10. In the Copy manufacturer's files from field:
11. Click OK; then, in the next window, click OK.
12. After the device driver installs, remove the diskette or the CD from the drive and
Installing device drivers for Windows NT 4.0
Use the following instructions when you do one the following:
•
•
Installing device drivers while installing Windows NT 4.0
To install the ServeRAID device driver while installing Windows NT 4.0:
1. Insert either of the following:
2. When the message
3. After loading some files, Windows displays a screen where you can manually
4. When prompted in the next window, select Other from the list.
5. When prompted to insert the Manufacturer-supplied hardware support
6
ServeRAID™-4x Ultra160 SCSI Controller Device Driver Installation Instructions
opens.
For ServeRAID-4M or ServeRAID-4L
controllers
For ServeRAID-4H controllers
where a is the diskette drive letter and z is the CD-ROM drive letter.
restart the server.
Install device drivers while installing Windows NT 4.0
Install or update device drivers after installing Windows NT 4.0
•
The Windows NT startup (boot) diskette into the diskette drive
•
The startable Windows NT CD into the CD-ROM drive;
then, restart the server.
Setup is inspecting your computer's hardware
configuration...
is displayed, press the F6 key.
specify a controller. When this screen appears, press the S key to specify addi-
tional devices.
disk , insert the IBM ServeRAID Device Drivers diskette into the diskette drive;
then, press Enter.
If you are installing from diskette, type:
a:\win2k\4M_4L
If you are installing from CD, type:
z:\win2k\4M_4L
If you are installing from diskette, type:
a:\win2k\others
If you are installing from CD, type:
z:\win2k\others
Advertisement
