Advertisement
For Windows 2000,
At a DOS prompt, type the following and press Enter:
Windows NT 4.0,
d:\tools\dsk4w32 c:\temp\updrh62.img
Windows 98, or
Windows 95
For Linux
Type the following (all on one line) and press Enter:
dd if=/tmp/updrh62.img of=/dev/ diskettedevicefile
bs=32k
For OS/2 Warp
At an OS/2 prompt, type the following and press Enter:
d:\tools\dsk4wrp c:\temp\updrh62.img
where
•
d is the drive letter of the CD-ROM drive.
•
c:\temp\updrh62.img is the path to the Updated Red Hat Installation diskette
image.
•
diskettedevicefile is the specific device file for the diskette block device. Typi-
cally, this is /dev/fd0.
5. Remove the diskette from the diskette drive and label it Updated Red Hat Installa-
tion diskette.
6. If you are not creating the diskette on Linux, remove the IBM ServeRAID Support
CD from the CD-ROM drive.
Creating the IBM ServeRAID Device Driver for Red Hat Linux
diskette
To create the IBM ServeRAID Device Driver for Red Hat Linux diskette on Windows
95, Windows 98, Windows NT 4.0, Windows 2000, Linux, or OS/2, do the following:
1. Insert the IBM ServeRAID Support CD into the CD-ROM drive.
2. If you are not creating the diskettes on Linux, continue to step 3.. Otherwise, type
the following and press Enter:
mount -t iso9660 /dev/ cdromdevicefile /mnt
where cdromdevicefile is the specific device file for the CD-ROM block device.
Typically, this is /dev/cdrom.
3. Insert a formatted diskette into the diskette drive.
4. Do one of the following:
For Windows 2000,
Windows NT 4.0,
Windows 98, or
Windows 95
For Linux
For OS/2
where
•
d is the drive letter of the CD-ROM drive.
•
a is the drive letter of the diskette drive.
At a DOS prompt, type the following and press Enter:
d:\tools\dsk4w32 images\redhatdd.img a:
Type the following (all on one line) and press Enter:
dd if=/mnt/images/redhatdd.img of=/dev/ diskettedevicefile
bs=32k
At an OS/2 prompt, type the following and press Enter:
d:\tools\dsk4wrp images\redhatdd.img a:
13
Installing device drivers
Advertisement
