Advertisement
Installing an HBA diskette file using Pkgadd
1. Insert the IBM ServeRAID Device Drivers for SCO Operating Systems - UnixWare
2. Type:
3. Press Enter.
4. When the message Insert diskette into Floppy Drive 1 appears, press Enter.
5. When the message Installation of IBM ServeRAID SCSI IHV HBA (ips)
6. Press Enter.
7. After the device driver is installed, shut down and restart the server.
Installing an HBA diskette file using SCOAdmin
1. Insert the IBM ServeRAID Device Drivers for SCO Operating Systems - UnixWare
2. Start the SCOAdmin utility program by typing SCOADMIN at the system prompt.
3. Click Software_Management.
4. Click Application Installer.
5. Click the Install From tab.
6. Click Disk_A.
7. Click Update View if nothing appears in the window.
8. When the icon labeled ips appears in the window, click Install.
9. After the device driver is installed, remove the diskette from the diskette drive;
20
ServeRAID™-4x Ultra160 SCSI Controller Device Driver Installation Instructions
HBA and OpenServer BTLD diskette into the diskette drive.
pkgadd –d /dev/dsk/f0t
was successful appears, type:
q
HBA and OpenServer BTLD diskette into the diskette drive.
then, shut down and restart the server.
Advertisement
