Download Print this page

IBM ServeRAID-4 Ultra160 Series Installation Instructions Manual page 9

Scsi controller device driver
Hide thumbs Also See for ServeRAID-4 Ultra160 Series:

Advertisement

10. When prompted to select a device driver to install, select IPSRAID.HAM.
11. Click Yes when prompted to copy the IPSRAID.HAM driver.
12. When the prompt appears to specify the server boot path, type:
13. After the installation program copies all files, you can edit parameters (such as the
14. After you edit the parameters, click Save Parameters and load driver to load the
15. Press Esc to exit from the installation screens.
Note: If you want NetWare to load the ServeRAID device driver automatically during
Installing device drivers for OS/2
Use the following instructions when you do one the following:
For NetWare 5.x
where a is the diskette drive letter and d is the CD-ROM drive letter.
c:\nwserver
Notes:
a.This instruction assumes that you installed NetWare in its default directory. If
you did not install NetWare in the NWSERVER directory on drive C, modify
step 12. accordingly.
b.If any of the files you are installing already exist on the server, NetWare will
prompt you to save the older files. Although it is not necessary to save the
older files, it might be useful to do so.
ServeRAID slot number) from the Driver IPSRAID Parameter Actions window.
ServeRAID device driver.
Note: If the device driver is not installed already and the operating system is
installed, an error message stating that the device driver failed to load
should appear after you complete the previous step. If that happens, do
the following:
a. Press Esc to exit from the installation screens.
b. Shut down the server.
c. Restart the server by typing the following at the system prompt:
server
d. The server automatically loads and installs the device driver.
startup, you must add the appropriate LOAD command (for example, load
ipsraid.ham slot=1 ) to the NetWare startup command file (usually
C:\NWSERVER\STARTUP.NCF).
Install device drivers while installing OS/2
Install or update device drivers after installing OS/2
If you are installing from CD, type:
d:\programs\netware\driver\netware4
If you are installing from diskette, type:
a:\netware5
If you are installing from CD, type:
d:\programs\netware\driver\netware5
Installing device drivers
9

Advertisement

loading

This manual is also suitable for:

Serveraid-4mServeraid-4hServeraid-4lServeraid-3hb