Download Print this page

IBM ServeRAID-4 Ultra160 Series Installation Instructions Manual page 16

Scsi controller device driver
Hide thumbs Also See for ServeRAID-4 Ultra160 Series:

Advertisement

5. Keep the IBM ServeRAID Device Drivers for SCO Operating Systems - UnixWare
For additional information about adding a boot-time loadable driver at boot time, refer
to "Using Boot-Time Loadable Drivers" in the SCO OpenServer Handbook .
Adding IPSRAID BTLD after installing OpenServer
1. Start the server in system maintenance mode, and log in as ROOT .
2. Type:
3. Press Enter; then, select the diskette drive in which you will insert your installation
4. When prompted, insert the IBM ServeRAID Device Drivers for SCO Operating
5. When prompted for the name of the package, type:
6. Press Enter; then, relink the kernel (as described in "Relinking the kernel" in the
7. Press Enter; then type:
8. Press Enter.
9. After the kernel rebuilds, the following message appears:
10. When the system asks for the kernel environment to be rebuilt, type y
11. Remove the IBM ServeRAID Device Drivers for SCO Operating Systems - Unix-
12. Shut down the server; then, restart the server.
Installing device drivers for UnixWare
Use the following instructions when you do one the following:
16
ServeRAID™-4x Ultra160 SCSI Controller Device Driver Installation Instructions
dynamic linker: dlvr_audit: Cannot open /dev/zero for file
/lib/libprot.so.1
You can ignore the first message; if the second message appears, however, you
must press Enter when prompted to continue the installation.
HBA and OpenServer BTLD diskette available. You will need it to configure the
device driver into the link kit.
installpkg
diskette.
Systems - UnixWare HBA and OpenServer BTLD diskette.
ipsraid
SCO OpenServer Handbook ) by typing the following command:
cd /etc/conf/cf.d
./link_unix
The UNIX kernel has been rebuilt.
Do you want this kernel to boot by default?
To continue, type y
The system backs up the old kernel by moving /unix to /unix.old.
The system will respond with a message.
Ware HBA and OpenServer BTLD diskette from the diskette drive.
Install device drivers while installing UnixWare
Install or update device drivers after installing UnixWare

Advertisement

loading

This manual is also suitable for:

Serveraid-4mServeraid-4hServeraid-4lServeraid-3hb