Placing The Block On To Motherboard; Attaching Block On The Motherboard - EK-Quantum Momentum ROG Rampage VI Encore User Manual

PLACING THE BLOCK ON TO MOTHERBOARD

Place EK-Quantum Momentum ROG Rampage VI Encore series
water block to the motherboard or vice versa (as shown on the
photo). Make sure that mounting holes are aligned.

ATTACHING BLOCK ON THE MOTHERBOARD

STEP 1
Prior to fastening the screws please make sure the mounting holes
on the motherboard's circuit board are aligned with the water block.
CPU Screw
STEP 2 (CPU part)
Carefully tighten all the marked screws carefully using 2.5 mm Allen
Key. Do not use excessive force.
STEP 2
- 6 -