Before Use - Gastroback Design Mixer Duo Advanced Operating Instructions Manual

lukewarm state before placing in the jug to avoid sudden bursts of steam that could cause
the lid to dislodge.

BEFORE USE

WARNING:
DO NOT let young children play with the appliance or any part
of it or the packaging! The cutting blades are very sharp. Ensure not to get injured.
Always grasp the appliance at both sides at the bottom of the power base to move the appli-
ance. DO NOT grasp the appliance at the power cord or jug for moving it.
1. Unpack the appliance and all accessories carefully.
Keep all the packing material until all the parts of the Design Mixer have been found and the
appliance has been assembled.
To move the appliance, always grasp it at both sides at the bottom of the power base.
Tip: It is good advice to keep the packing material in a safe place in case you wish to repack
the product for storage or shipping.
2. The power cord is stored under the bottom of the power base. Carefully unwind the power
cord completely.
3. Check that no parts are missing. Check the Design Mixer for any damage (e.g. damaged
seals and sealing surface, broken, or scratched plastic parts). If there is any damage, do not
operate the appliance and contact an authorized service centre. See: Knowing Your »Design
Mixer Duo Advanced«
4. Carefully remove all shipping materials and promotional materials, but DO NOT remove
any warning labels or the model label. Especially ensure that there are no foreign objects
(e.g. packaging material) in the jug and drive shaft coupling of the power base.
WARNING – RISK OF ELECTRIC SHOCK
Always switch OFF (press ON/OFF button) and unplug the appliance and wait for
the motor to come to a complete standstill before cleaning. Do not immerse the power
base or power cord in water or other liquids or spill any liquids on/in the
power base or power cord. Do not place the power base or power cord in an automatic
dishwasher.
5. Before first use and after a longer period of storage, wash jug, lid, measuring cup and
citrus cone with warm soapy water, rinse with clear tap water and dry the exterior especially
at the bottom of the jug thoroughly. See: Care and Cleaning
Preparing the Appliance for Operation
IMPORTANT: Only place the appliance on a stable, dry, level and clean surface. Be aware
that, due to the agitation of the motor, the appliance could move around on the table during
operation. Thus, do not place the appliance on inclined surfaces or near the edge of the table,
where it can fall over and/or fall down. Do not place any clothes or tissue or other foreign
objects under the appliance during operation to avoid risk of fire, overheating or electric
shock. Do not block the ventilation slots of the power base. During operation, the operating
elements (see: Knowing Your »Design Mixer Duo Advanced«) must be accessible all the time.
Ensure to keep the appliance in an appropriate distance of at least 30 cm on each side to any
51