Festo MH1 Series Brief Description page 27

6 Fitting the valves
Please note
Please note the following when fitting valves onto the
basis blocks:
S Use only uniform valve functions. Valves with the
function in basic position closed" may not be com
bined with valves in basic position open".
S Basis blocks with electric multipin Fit only valves of
the same voltage type.
S Basis blocks type MHP...: Fit only semi inline valves.
S Use the following cover plate for sealing a non−as
signed valve location:
Basic units type MH...:
Basic units type MH...−PI:
S Protect also the electrical connections against dirt
with the adhesive foil supplied with the cover plate.
0603a
Festo MH.−...
MH1: type MHAP1−BP−3
MH2: type MHAP2−BP−3
MH1: type MHAP1−BP3−PI
MH2: type MHAP2−BP3−PI
English
27