Replacing The Drive Axle - Husqvarna 125C Workshop Manual

4
32
Centrifugal clutch

Replacing the drive axle

Pull out the drive axle from the shaft
with the help of a pair of flat nose pliers
for inspection and possible
replacement.
503 80 17-01
Replacing the drive axle
Pull out the drive axle from the shaft
with the help of a pair of flat nose pliers
for inspection and possible
replacement.
Lubricate the drive axle generously with
grease when assembling.
Assemble the remaining parts in the
reverse order as set out for dismantling.