Maintenance And Cleaning; Technical Specifications - HomeMatic HM-LC-Sw1-Pl-2 Operating Manual

11

Maintenance and cleaning

This product is maintenance-free. Repairs are only to be done by
trained professionals.
Dimming actuator:
The dimmer HM-LC-Dim1L-Pl has an internal device fuse! This fuse
protects the Triac from greater current load. If the device becomes
overloaded and the fuse is blown, it can be replaced!
Replace fuses with same type fuses only (micro-fuse 5 x 20 mm,
1.25 A slow)!
12

Technical specifications

Switch actuator:
Device short description:
Supply voltage:
Current consumption:
Power consumption in standby:
Kind of load:
Max. switching capacity:
Relay:
Radio frequency:
Receiver class:
Typ. open area RF range:
Duty cycle:
Operating mode:
Switch type:
Degree of protection:
Protection class:
Withstand voltage:
Ambient temperature:
Dimensions (W x H x D):
26
HM-LC-Sw1-Pl-2
230 V/50 Hz
16 A max.
0.7 W
ohmic load
3680 W
Shutter contact
868.3 MHz
SRD Class 2
> 100 m
< 1 % pro h
S1
independently mounted
switch
IP20
I
2500 V
-10°C to +35°C
63 x 125 x 40 mm
(not incl. plug)
Weight:
Dimming actuator:
Device short description:
Supply voltage:
Min. load:
Max. switching capacity:
Current consumption:
Power consumption in standby:
Dimming procedure:
Kind of load:
Radio frequency:
Receiver class:
Typ. open area RF range:
Duty cycle:
Max. transmit power:
Operating mode:
Switch type:
Degree of protection:
Protection class:
Withstand voltage:
Ambient temperature:
Dimensions (W x H x D):
Weight:
Instructions for disposal
Do not dispose off the device as part of household garbage!
Electronic devices are to be disposed of in accordance with
the guidelines concerning electrical and electronic devices
via the local collection point for old electronic devices.
The CE sign is a free trade sign addressed exclusively to
the authorities and does not include any warranty of any
properties.
190 g
HM-LC-Dim1L-Pl-2
230 V/50 Hz
25 VA
250 VA
1,1 A max.
0,8 W
leading edge
ohmic and inductive lamp
load
868,3 MHz
SRD Class 2
> 100 m
< 1 % per h
10 mW
S1
independently mounted
switch
IP20
I
2500 V
-10°C to +35°C
63 x 125 x 40 mm
(not incl. plug)
205 g
27