HomeMatic HM-LC-Sw1-Pl-2 Operating Manual page 9

Table of Contents
1 Information concerning these instructions . . . . . . . . . . . . . . 17
2 Hazard information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
3 Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
4 General system information on HomeMatic . . . . . . . . . . . . . 19
5 General information on radio operation . . . . . . . . . . . . . . . . 20
6 Start up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
6.1 Simple operating functions on the device. . . . . . . . . . . . . . . 21
6.2 Teaching-in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
6.2.1 Teaching-in to HomeMatic devices. . . . . . . . . . . . . . . . . . . . 21
6.2.2 Teaching in to a HomeMatic CCU . . . . . . . . . . . . . . . . . . . . 22
7 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
8 Resetting to factory status . . . . . . . . . . . . . . . . . . . . . . . . . . 24
9 Device LED feedback messages . . . . . . . . . . . . . . . . . . . . . 25
9.1 Flash codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
9.2 Operational status display . . . . . . . . . . . . . . . . . . . . . . . . . . 25
10 Behavior after power restoration . . . . . . . . . . . . . . . . . . . . . 25
11 Maintenance and cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . 26
12 Technical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
16
1 Information concerning these instructions
Read these instructions carefully before beginning operation with
your HomeMatic components.
Keep the instructions handy for later consultation!
Please hand-over the operating manual as well when you hand-
over the device to other persons for use.
Symbols used:
Attention! This indicates a hazard.
Note. This section contains additional important information!
Note. This section contains additional important information
about using the device in connection with the HomeMatic
Central Control Unit.
Note. This section contains additional important information
about using the device in connection with the QIVICON
Home Base.
2 Hazard information
Do not open the device. It does not contain any parts to be
maintained by the user. There is a risk of electrical shock by
opening the device.
This device is to be operated indoors only and keep away
from the influences of humidity, dust and sunshine or other
radiating heat sources.
Load the devices to the specified limits only. An overload
can cause destroy the device, cause fires or electrical
accidents.
17