Update Nand Flash Image; Instructions For Use; How To Use Opengl Es Demo - Embest SBC8600B Quick Start Manual

7.5.2 Update NAND Flash image

Format TF Card
Please refer to p84.
Copy Runtime Image
Copy MLO, EBOOTND.nb0, NK.bin, XLDRNAND.nb0 and EBOOTSD.nb0 image files
located in CD\WINCE700\image to the TF card.
Flashing Image File
Insert the TF card and reboot the system. The system will then boot from the
TF card. The HyperTerminal will display a boot message; you can press
[SPACE] to enter the EBOOT menu. An image can be flashed to NAND flash
according to the following steps:
1. Press [8] to enter the Flash menu.
2. Press[9]->[4]->[A], [9]->[3]->[B] and[9]->[2]->[C] to write
XLDR, EBOOT and NK images respectively.
3. Then press [0] to return to main menu, and press [2], [3] Select
boot from NAND flash, then type [A] select the LCD,VGA or LVDS
output mode [7] and [y] to save the Boot setting.
Unplug the TF card and then reboot the system, and then the system will
boot from NAND Flash.

7.6 Instructions for Use

7.6.1 How To Use openGL ES Demo

1. Select PowerVR items in the catalogue items view in VS2008 as
below:
Page | 90