Tisdk System Demonstration - Embest SBC8600B Quick Start Manual

6.9.2 TISDK System Demonstration

1. Format a TF card into two partitions by following the steps
described in 7Appendix 3:Making a Linux Boot Disk;
2. Insert the DVD-ROM and TF card into the PC, and then execute
the following instructions:
cp /media/cdrom/linux/demo/tisdk/image/MLO /media/LABEL1
cp
/media/LABEL1
cp
/media/cdrom/linux/demo/tisdk/image/uImage/media/LABEL1/uIm
age
rm -rf /media/LABEL2/*
sudo tar xvf
/media/cdrom/linux/demo/tisdk/image/tisdk-rootfs-am335x-evm
.tar.gz -C /media/LABEL2
sync
umount /media/LABEL1
umount /media/LABEL2
3.
After the above instructions are executed, please short jumper JP5
the
and insert
supply. The boot-up information is shown as below:
/media/cdrom/linux/demo/tisdk/image/u-boot.img
into
TF card the board, and then plug in the power
Page | 75