Network Testing - Embest SBC8600B Quick Start Manual

6.8.10 Network Testing

1. There are two Ethernet interfaces, NET1 (J1) and NET2 (J2),
associated with two device nodes, eth0 and eth1. Please use two
network cables to connect the interfaces to a network and
ensure that the IP addresses of the interfaces are set in different
network subnets.
Note:
 The IP addresses of the two network interfaces need to be in different subnets,
or the testing will fail.
[root@SBC8600/]# ifconfig eth0 192.192.192.200
[root@SBC8600/]# ifconfig
eth0 Link encap:Ethernet HWaddr D4:94:A1:8D:EB:25
inet addr:192.192.192.200 Bcast:192.192.192.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:137 errors:0 dropped:4 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:13792 (13.4 KiB) TX bytes:0 (0.0 B)
Interrupt:40
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
[root@SBC8600/]# ping 192.192.192.170
PING 192.192.192.170 (192.192.192.170): 56 data bytes
64 bytes from 192.192.192.170: seq=0 ttl=128 time=4.486 ms
64 bytes from 192.192.192.170: seq=1 ttl=128 time=0.336 ms
[root@SBC8600/]# ifconfig eth1 192.168.168.116
[root@SBC8600/]# ifconfig
eth1 Link encap:Ethernet HWaddr 00:17:EA:96:34:D5
net addr:192.168.168.116 Bcast:192.168.168.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Page | 68