Using A 4.3" Lcd Display - Embest SBC8600B Quick Start Manual
Hide thumbs
Also See for SBC8600B:
- Quick start manual (33 pages) ,
- User manual (161 pages) ,
- Quick operation manual (19 pages)
Table of Contents
Advertisement
U-Boot SPL 2011.09-svn55 (Nov 20 2012 - 10:37:42)
I2C:
ready
DRAM: 512 MiB
WARNING: Caches not enabled
Did not find a recognized configuration, assuming General
purpose EVM in Profile 0 with Daughter board
NAND: HW ECC Hamming Code selected
512 MiB
MMC:
OMAP SD/MMC: 0
*** Warning - bad CRC, using default environment
Net:
cpsw
Hit any key to stop autoboot: 0 (press any key to enter uboot)
6.7.2 Using a 4.3" LCD Display
Modify the parameter by executing the command as follows in the U-boot
command mode.
SBC8600# setenv dispmode 4.3inch_LCD
SBC8600# saveenv
Page | 57
Advertisement
Table of Contents
