Updating Nand Flash And Booting From It - Embest SBC8600B Quick Operation Manual

Hide thumbs Also See for SBC8600B:

Table of Contents

Embest Technology

2） Copy all the files under \linux\image\ of the DVD-ROM to the TF card, and then

insert it on SBC8600B;

3） Short the jumper JP5 and power on the system, the system boots up

successfully when the following information appears in the HyperTerminal

window; Enter root to log in Linux system;

SBC8600 login: (enter"root" to log in)

4） U-boot configuration

The system image has a default setting for 4.3-inch LCD. You can change the

settings in UBOOT according to the detailed instructions contained in 3.10

Display Mode Configurations.

2. Updating NAND Flash and Booting from It

Updating image files in NAND Flash requires the help of u-boot. No matter whether there

is data in NAND Flash, image files can be updated by running u-boot from TF card.

1） Use

HP USB Disk Storage Format Tool 2.0.6

FAT32 filesystem;

2） Copy the files MLO, u-boot.img, zImage, embest-SBC-SBC8600.dtb and

rootfs.tar.xz from \linux\image in the DVD-ROM to the TF card;

3） Insert the TF card on SBC8600B and short the jumper JP5

4） Power the board on;

5） When the LEDs on the board blink quickly, the update is in progress.

6） When the LEDs on the board blink as heart frequency and buzzer alarmed, the

Table 2

to format a TF card to FAT or

SBC8600B-QSG-V1.2

Table of Contents