Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Embest SBC6845
Summary of Contents for Embest SBC6845
- Page 1 SBC6845 SBC6845 SBC6845 SBC6845 Single Board Computer Single Board Computer Single Single Board Board Computer Computer User User Manual Manual User User Manual Manual ( ( ( ( WinCE6.0 WinCE6.0 WinCE6.0 WinCE6.0） Version 1.2 – Jan. 18, 2013...
- Page 2 Copyright Statement: Statement: Statement: � SBC6845 and its related intellectual property are owned by Shenzhen Embest Technology Co., Ltd. � Shenzhen Embest Technology has the copyright of this document and reserves all rights. Any part of the document should not be modified, distributed or duplicated in any approach and form with the written permission issued by Embest Technology Co., Ltd.
-
Page 3: Table Of Contents
Chapter Product Overview Overview............................................................... 1.1 Introduction........................1 1.2 Packing List........................1 1.3 Product Features......................1 1.4 Components on SBC6845....................3 1.5 Hardware Dimensions.....................4 1.6 BSP Package in CD-ROM....................4 Chapter Chapter Chapter 2 2 2 2 System System System Boot-up... -
Page 4: Introduction
RS485), a CAN interface, an Ethernet interface, a high-speed USB host interface, a SD/MMC card interface and an audio output interface. SBC6845 is designed to satisfy the different requirements of various fields such as industrial control, intelligent instrumentation, data acquisition and analysis, medical products and network equipments. - Page 5 � A CAN 2.0 interface (isolated) � 2 USB 2.0 interfaces � A 10/100Mb Ethernet interface � A SD card slot (hot plugging) � Pins for SPI, I2C, PWM, ADC, Keypad and GPIO Copyright © 2012-2013 Embest Technology SBC6845 User Manual...
-
Page 6: 1-1 Components On Sbc6845
Panel Panel Panel SPI&IIC&PWM&ADC SPI&IIC&PWM&ADC DEBUG&COM0&COM1&COM2(RS485)&COM DEBUG&COM0&COM1&COM2(RS485)&COM DEBUG&COM0&COM1&COM2(RS485)&COM 3 3 3 3 16 GPIO 16 GPIO SPI&IIC&PWM&ADC SPI&IIC&PWM&ADC DEBUG&COM0&COM1&COM2(RS485)&COM 16 GPIO 16 GPIO Figure Figure Figure Figure 1-1 1-1 Components on SBC6845 Copyright © 2012-2013 Embest Technology SBC6845 User Manual... -
Page 7: 1-2 Hardware Dimensions
The CD-ROM provided along with SBC6845 contains a BSP package that helps development of WinCE system. Users can make a custom system running on SBC6845 platform by utilizing the package. The table shown below lists out the contents of the BSP attached with the corresponding descriptions. - Page 8 OALEXE OALEXE OALEXE OALEXE Code used to generate WinCE 6.0 OAL.EXE OALLIB OALLIB OALLIB OALLIB Code unsed to generate WinCE 6.0 OAL.EXE FILES FILES FILES FILES Configuration files used to customize system Copyright © 2012-2013 Embest Technology SBC6845 User Manual...
- Page 9 Check the option and SPI interface driver as well if CAN bus is required. By default, LCD driver is enabled to support 4.3-inch, 5.6-inch and 7-inch screen provided by Embest. The adoption of an appropriate display configuration will determined automatically according to states of jumpers JP10 and JP11.
- Page 10 NAND Flash, please check NandFlash bootloader. Check the option if Hive registry is required. Check the option if the spare space is required to save data after WinCE is written in NAND flash. Copyright © 2012-2013 Embest Technology SBC6845 User Manual...
-
Page 11: Testing
System Boot-up Boot-up Currently SBC6845 WinCE 6.0 system can boot up from NAND Flash or serial interface. This section will briefly introduce the boot-up principle of SBC6845 WinCE 6.0 system and give you a detailed explanation of the booting process from NAND Flash. -
Page 12: Booting From Nand Flash
EBOOT at 0x00080000 in NAND Flash to the SDRAM on SBC6845 to execute EBOOT, which by default will be proceeding to copy WinCE image named NK.bin from the address 0x00080000 in NAND Flash to SDRAM and let operating system take over. -
Page 13: System Burning
System Burning Burning By default, SBC6845 is installed with a Linux system, and therefore users have to burn the NAND Flash on the board with a WinCE system by themselves. The following contents will introduce how to burn the flash with a whole system step by step by using the WinCE6.0 provided in the CD-ROM and a burning tool SAM-BA from Atmel, or using... -
Page 14: Hardware Connections And Configurations
Configurations Configurations 1 1 1 1 ） Use a cross-over serial cable and a USB cable to connect SBC6845 to your 2 2 2 2 ） Configure HyperTerminal on your PC according to the settings shown in the following figure;... -
Page 15: Erasing Nand Flash
Connect Connect. Note: Note: Note: Note: � Please short JP8 on SBC6845 before you click Connect Connect Connect Connect. 2 2 2 2 ） NandFlash NandFlash Then the main window of SAM-BA will be shown as below. Click NandFlash... - Page 16 All in the Scripts Scripts drop-down menu and click Execute Execute to erase the contents of NAND Flash as the figure shown below; Figure Figure Figure Figure 1-4 1-4 Erase NAND Flash Copyright © 2012-2013 Embest Technology SBC6845 User Manual...
-
Page 17: Writing Bootloader And System Image
� If you can not find FRSTBOOT.nb0 in the above window, please click File File File File Type Type Type Type drop-down menu and select All All Files Files Files Files (*.*) (*.*) (*.*) (*.*) to display all the files. Copyright © 2012-2013 Embest Technology SBC6845 User Manual... - Page 18 Open, and then click Send Send File File on the right of Send Send Send Send File File File File Name Name Name Name text box to write EBOOT.nb0 into NAND Flash. Copyright © 2012-2013 Embest Technology SBC6845 User Manual...
-
Page 19: Updating The System
Send File File File File Name Name Name Name text box to write NK.nb0 into NAND Flash. WinCE 6.0 image has been written to SBC6845. You can reboot the board and enter the system now. Updating Updating System System 1.2 Updating... - Page 20 CEDownload.exe, EBOOT will automatically erase the data at the corresponding address. 1 1 1 1 ） Use a cross-over serial cable and a network cable to connect SBC6845 to your PC; 2 2 2 2 ）...
- Page 21 � The IP addresses in the window should be set as the same as your PC’s network segment in order to ensure a proper communication. � The EBOOT program generated from BSP contained in the CD-ROM can only support downloading NK.bin through network cables, not FIRSTBOOT and EBOOT. Copyright © 2012-2013 Embest Technology SBC6845 User Manual...
- Page 22 Server window. The HyperTerminal will show information as the follows; Figure Figure Figure Figure 1-11 1-11 1-11 1-11 Downloading NK.bin After downloading is completed, the system will reboot and load WinCE system automatically. Copyright © 2012-2013 Embest Technology SBC6845 User Manual...
-
Page 23: Chapter Chapter 3 3 3 3 Generating Generating Generating Wince Wince Wince System System System Image Image Image
System Image Image The CD-ROM provided along with SBC6845 contains a BSP package that includes hardware drivers and operating system source code. You can generate a WinCE image by directly using the BSP package, or make a customized system by modifying the source code in the BSP. -
Page 24: Generating Image Without Changes
OSDesigns OSDesigns D:\WINCE600 D:\WINCE600 Create a folder named OSDesigns OSDesigns under the directory D:\WINCE600 D:\WINCE600 where SBC6845.rar SBC6845.rar Visual Studio 2005 is installed, and decompress SBC6845.rar SBC6845.rar saved under \03 WinCE WinCE WinCE WinCE 6.0 6.0 Kit\02 Kit\02 Kit\02 Kit\02 Project\... - Page 25 6.0 in the tree-view on the left, and enter a project name and a path where project files will be saved at the bottom part of the window, and then click OK Copyright © 2012-2013 Embest Technology SBC6845 User Manual...
- Page 26 Figure Figure Figure Figure 2-3 2-3 New Project Design Wizzard 4 4 4 4 ） Check SBC6845:ARMV4I SBC6845:ARMV4I SBC6845:ARMV4I SBC6845:ARMV4I in the following window and click Next Next Next Next; Figure Figure Figure Figure 2-4 2-4 Select a BSP Copyright © 2012-2013 Embest Technology...
- Page 27 6 6 6 6 ） Select Mobile Mobile Mobile Mobile Handheld Handheld Handheld Handheld in the list of variants and click Next Next Next Next; Figure Figure Figure Figure 2-6 2-6 Select a Variant Copyright © 2012-2013 Embest Technology SBC6845 User Manual...
- Page 28 Select the functions required in the list of networking and communications, and uncheck the options Bluetooth Bluetooth Bluetooth Bluetooth and IrDA IrDA IrDA IrDA (SBC6845 does not support Next Bluetooth and infrared communication), and then click Next Next Next; Figure Figure...
- Page 29 Figure 2-9 2-9 Click Finish Finish Finish Finish Acknowledge Acknowledge 10） Click Acknowledge Acknowledge in the window shown below; Figure Figure 2-10 2-10 Acknowledge Acknowledge Figure Figure 2-10 2-10 Click Acknowledge Acknowledge Copyright © 2012-2013 Embest Technology SBC6845 User Manual...
- Page 30 2-11 2-11 2-11 Customization Configurations Here you can modify the configurations for functional components and module drivers of SBC6845 based on your requirement (Please refer to section 1.6 for detailed information on drivers), for example, you can check Function Driver...
- Page 31 Figure Figure Figure Figure 2-12 2-12 2-12 2-12 Select Compilation Type 13） Click 项目 > SBC6845 SBC6845 属性 on the menu bar to open SBC6845 Properties SBC6845 SBC6845 window as shown below; Figure Figure Figure Figure 2-13 2-13...
- Page 32 Embest Technology 29 29 29 29 Build Build Options Options 14） Click Build Build Options Options in the tree-view of SBC6845 Properties window and check options on the right for system compilation. Figure 2-14 Figure Figure Figure 2-14 2-14 2-14 Compilation Options...
-
Page 33: Appendix Appendix
Menu Brief Brief Introduction EBOOT Menu Menu EBOOT is a program saved in the NAND Flash on SBC6845. When the board is SPACE powered up, the system will conduct a 5-second countdown. By pressing SPACE SPACE SPACE on your PC’s keyboard within the 5 seconds, you can enter EBOOT menu and see it in HyperTerminal as shown below;... - Page 34 Boot-Up Logo Logo Making Making Boot-Up Boot-Up Logo Logo The section will show you how to make a logo with a software tool Image2Lcd and display it when SBC6856 is booting up. Copyright © 2012-2013 Embest Technology SBC6845 User Manual...
- Page 35 � Please ensure the image you selected is a BMP bit image with a 410X140 resolution and 24-bit color bits. If the original image is not consistent with these properties, please modify it with other graphics software first. Copyright © 2012-2013 Embest Technology SBC6845 User Manual...
- Page 36 #else and #endif of header_data[] data array. After compiling and generating a new eboot.nb0 and writing it into NAND Flash, you can see the logo when the board is booting up. Copyright © 2012-2013 Embest Technology SBC6845 User Manual...
-
Page 37: Technical Technical Support Support Support And And And Warranty Warranty Warranty
Technical Support Support Technical Technical Support Support Embest Technology provides its product with one-year free technical support including: � Providing software and hardware resources related to the embedded products of Embest Technology; � Helping customers properly compile and run the source code provided by Embest Technology;... - Page 38 G. G. G. Products purchased from unauthorized sales; H. H. H. H. Warranty (including verbal and written) that is not made by Embest Technology and not included in the scope of our warranty should be fulfilled by the party who committed. Embest Technology has no any responsibility;...
- Page 39 Website Website Website Website: http://www.armkits.com http://www.embest-tech.com Address Address Address Address: Tower B 4/F, Shanshui Building, Nanshan Yungu Innovation Industry Park, Liuxian Ave. No. 1183, Taoyuan St., Nanshan District, Shenzhen, China (518055) Copyright © 2012-2013 Embest Technology SBC6845 User Manual...
Need help?
Do you have a question about the SBC6845 and is the answer not in the manual?
Questions and answers