1. Manuals
  2. Brands
  3. Embest Manuals
  4. Single board computers
  5. SBC6045
  6. User manual

Embest SBC6045 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SBC6045
User
User
Manual
Manual
User
User Manual
Manual
SBC6045
SBC6045
SBC6045
SBC6045 User
Rev.
Rev.
Rev. 1. 1. 1. 1.2 2 2 2
Rev.
SBC6
SBC6
SBC6
SBC60 0 0 0 45
45
45
45 User
User
User
User Manual
User
User
Manual
Manual
User Manual
Manual
Rev. 1.2
Release: 2013-02-26
Manual
Manual
Manual
1 1 1 1 of of of of 92 92 92 92

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SBC6045 and is the answer not in the manual?

Questions and answers

Related Manuals for Embest SBC6045

Summary of Contents for Embest SBC6045

  • Page 1 45 User User User User Manual Manual Manual Manual SBC6045 SBC6045 User User Manual Manual SBC6045 SBC6045 User User Manual Manual Rev. 1.2 Release: 2013-02-26 SBC6045 User User Manual Manual Rev. Rev. Rev. 1. 1. 1. 1.2 2 2 2 User...
  • Page 2 Thank you for purchasing our products, we will do better because of you. Embest Embest Info&Tech Info&Tech Co., Co., LTD. LTD. Embest Embest Info&Tech Info&Tech Co., Co., LTD. LTD. Room 509, Luohu Science&Technology Building, #85 Taining Rd., Shenzhen, Guangdong, China 518020 Tel: +86-755-25635656/25636285 Fax: +86-755-25616057 Email: market@embedinfo.com http://www.embedinfo.com/english http://www.armkits.com...
  • Page 3 2011-05-27 1.0 2011-08-02 1.1 Copyright: Embest Info&Tech Co., Ltd..Reserves the right to interpret Non-written permission by the Company, any units and personality will be allowed to extract and copy all or part of this document does not in any form of communication.

  • Page 4: Table Of Contents

    Manual Manual Table of Contents SBC6045 SBC6045 USER USER MANUAL MANUAL .................................................................1 1 1 1 SBC6045 SBC6045 USER USER MANUAL MANUAL......................PART PART PART PART 1 1 1 1 OVERVIEW OVERVIEW OVERVIEW OVERVIEW..........................................................................................6 6 6 6 ........................
  • Page 5 13.1 Installation of SBC6045 WinCE 6.0 BSP.................... 66 13.2 Modules of SBC6045 WinCE 6.0 BSP....................66 13.3 Compilation of WinCE system based on SBC6045 WinCE 6.0 BSP............68 13.4 Compilation of WinCE system based on SBC6045 WinCE 6.0 BSP............68 13.5 Modules of SBC6045 WinCE 6.0 BSP driver..................78 13.6 How to enter EBOOT menu.........................81...

  • Page 6: Part 1 1 1 1

    400MHz Atmel AT91SAM9G45 microprocessor and features wide input range from 12V to 36V with isolated power. The SBC6045 board uses Mini6045 processor card as the CPU core board which has 256MB (2*128MByte) DDR2 SDRAM, 256MB Nand Flash, 4MB Data Flash, 2Kbit EEPROM and integrates UART, Ethernet, USB OTG, LCD, Touch screen, RTC and TF card slot on board.

  • Page 7: Part 2 2 2

    SIM Card Slot CAN1 Core board CAN2 Connector DC 12V USB Host Ethernet 0 Buzzer COM1 COM2 COM0 COM3 SBC6045 consists of three parts ： Main board � core board � 4.3inch 480*272（ ） LCD module optional � LCD module 7.0inch 800*480（...
  • Page 8 SD card High-Speed SD Card interface supports hot-swappable Power Isolated powe Wide voltage range of 12 ~ 30V, 12V power input defaultly DEBUG：RS232 3 wire SBC6045 Serial port Communication User Manual Rev. Rev. 1. 1. 1. 1.2 2 2 2...
  • Page 9 Onboard rechargeable coin cell power supply for RTC Special Power Wiring connector leads to 12V power supply output, switch, Supply backlight and power supply management Main board picture： SBC6045 User Manual Rev. Rev. 1. 1. 1. 1.2 2 2 2 User...

  • Page 10: Core Board Functions

    COM0 COM3 Dimensions of PCB：185*125mm Connector pin definitions from board bottom to the core board, please refer to ： System Electrical Description 2.4 General system structure diagram SBC6045 User Manual Rev. Rev. 1. 1. 1. 1.2 2 2 2 User...

  • Page 11: Layout

    Description of of of of interfaces interfaces interfaces Description interfaces 3 3 3 3 .1 .1 .1 .1 LAYOUT LAYOUT LAYOUT LAYOUT SYSTEM LAYOUT DIAGRAM:： SBC6045 User Manual Rev. Rev. 1. 1. 1. 1.2 2 2 2 User User User Manual Manual Manual Rev.

  • Page 12: Power（J1

    High-speed SD card interface � Compatible SD / MMC interface card � 8-bit parallel bus data transfer mode � SD / MMC interface reference CPU resources as follows: SBC6045 User Manual Rev. Rev. 1. 1. 1. 1.2 2 2 2 User User...

  • Page 13: Net (J15)

    (J23) (J23) (J23) (J23) � Serial DEBUG connector leads with 1132R � This interface uses 3-wire � Resources SBC6045 User User Manual Manual Rev. Rev. Rev. 1. 1. 1. 1.2 2 2 2 User User Manual Manual Rev.
  • Page 14 RS232 and RS485 interfaces can be sent back to the CPU. DR9 interface connector (J25,J26) Pin is defined as follow： RRXD0 RRXD2 RTXD0 RTXD2 COM0 COM2 SBC6045 User User Manual Manual Rev. Rev. Rev. 1. 1. 1. 1.2 2 2 2...
  • Page 15 GPRS functions against J27 can not work at the same time.they just can work individually under the system. � This function provides directly from the CPU pins � resources： TXD3 COM3 RXD3 SBC6045 User User Manual Manual Rev. Rev. Rev. 1. 1. 1. 1.2 2 2 2 User...

  • Page 16: Buzzer（Buzz

    3 3 3 3 .9 .9 .9 .9 TWI TWI（J15 J15） � System provide a TWI interface Resources：PB10（TWD1） ，PB11（TWCK1） � � Interfaces：J15 � Pins definition： SBC6045 User User Manual Manual Rev. Rev. Rev. 1. 1. 1. 1.2 2 2 2 User User Manual Manual Rev.

  • Page 17: Jtag（J10

    LCDMOD PE17 LCDD10 LCDCC PE18 LCDD11 LCDVSYNC PE19 LCDD12 LCDHSYNC PE20 LCDD13 SBC6045 User User Manual Manual Rev. Rev. Rev. 1. 1. 1. 1.2 2 2 2 User User Manual Manual Rev. 17 17 17 17 of of of of 92 92 92 92...
  • Page 18 0.5mm, and also integrates touch screen function. pin definition as below： VDD5V VDD5V PWREN LCDMOD LCDCC LCDDEN VSYNC HSYNC DCLK LCD interface signal functional definition SBC6045 User User Manual Manual Rev. Rev. Rev. 1. 1. 1. 1.2 2 2 2 User User Manual Manual Rev.

  • Page 19: Key（B1

    This group of signals is converted into 24-bit LVDS interface signals by the chip SN75LVDS83, which is located on the core board.the definition of J3 ports linked to back board by connector between core board and the backplane as below： VDD33V VDD33V TCLK- TCLK+ SBC6045 User User Manual Manual Rev. Rev.
  • Page 20 SBC6 SBC6 SBC6 SBC60 0 0 0 45 45 User User User User Manual Manual Manual Manual VDD33V SBC6045 User User Manual Manual Rev. Rev. Rev. 1. 1. 1. 1.2 2 2 2 User User Manual Manual Rev. 20 20 20 20 of of of of 92 92 92 92...

  • Page 21: Led（D20

    (Note: This terminal matching resistance can only be used at both ends of UTP, meanwhile mid device does not require) 3 3 3 3 .18 .18 SPI SPI（J31 J31） System provides a way SPI communication interface. Item NO：J31 pin are defined as follows:： SBC6045 User User Manual Manual Rev. Rev.

  • Page 22: Rtc

    Signal Signal SHDN PC10 PC11 TCLK- TCLK+ PC12 PC13 VDD33 PC15 PC16 SBC6045 User User Manual Manual Rev. Rev. Rev. 1. 1. 1. 1.2 2 2 2 User User Manual Manual Rev. 22 22 22 22 of of of of 92 92 92 92...
  • Page 23 In addition the functions of on the core board，but also through 160PIN double straight leads out functions as follows： 8-bit single channel LVDS interface (24-bit color) Network port differential line DEBUG serial port USART0-3 USB OTG（HS） SBC6045 User User Manual Manual Rev. Rev.
  • Page 24 RX2+ VDD33 AVDDT LED4 LED5 Jumper on cpu core board： J10 Dataflash CS. J1 BMS pin of AT91SAM9G45 CPU. J4 Nandflash CS SBC6045 User User Manual Manual Rev. Rev. Rev. 1. 1. 1. 1.2 2 2 2 User User Manual Manual Rev.

  • Page 25: Part 3 3 3

    Linux system system SBC6045 BSP mainly used for customization Linux for SBC6045 hardware platform, you can do secondary development based on the development kit. The SBC6045 CD provides the BSP packet that refers to table 1-1 content. Table 1-1 specification of SBC6045 BSP...

  • Page 26: Getting

    Touch Touch Screen Screen Screen Test Test Test All about touch screen hardware connects can refer to “Hardware manual of SBC6045 ” 1. Enter the following command procedures for the implementation of touch screen calibration: ts_calibrate ts_calibrate [root@Mini6045:/]# ts_calibrate ts_calibrate Follow the on-screen prompts, click the “+”...

  • Page 27: Net Test

    “ttySAC0,ttySAC1,ttySAC2, ttySAC3 and ttySAC4” . “ttySAC0” is used for debug, “ttySAC1” and “ttySAC3” is used for RS-485(They also could be used for Serial). You can do test with the following commands. All about serial ports connect can refer to “Hardware manual of SBC6045” ./com ./com...

  • Page 28: Rs-485 Test

    [root@Mini6045:/mnt]# ls ls ls ls 3.Umount the usb disk cd / / / / [root@Mini6045:/mnt]# cd umount /mnt/ [root@Mini6045:/]# umount umount umount /mnt/ /mnt/ /mnt/ SBC6045 User User Manual Manual Rev. Rev. Rev. 1. 1. 1. 1.2 2 2 2 User User Manual Manual Rev.

  • Page 29: Rtc Test

    Insert in SD card, the system will print the following information. User can execute the following mount command to mount SD card and access SD card. [root@Mini6045:/]# mmc1: new SD card at address 0002 mmcblk0: mmc1:0002 N/A 489 MiB SBC6045 User User Manual Manual Rev.

  • Page 30: Led Test

    Setting Setting Setting the the Development Development Development Environment Environment Environment Before development the SBC6045, users must setup arm-linux cross development environment. Following the example of Ubuntu operating system(Linux). Install Install Cross Cross Cross C C C C ompiler ompiler ompiler 8.1 Install...
  • Page 31 Tools/mkimage ./ ./ ./ ./ /media/cdrom/02 Linux Tools/mkimage root@LINUXSERVER:~/embest/tools# export export export PATH=/root/embest/tools:$PATH PATH=/root/embest/tools:$PATH export PATH=/root/embest/tools:$PATH PATH=/root/embest/tools:$PATH root@LINUXSERVER:~/embest/tools# cd cd cd cd ../ ../ ../ ../ jxvf Bootstrap-v1.14.tar.bz2 root@LINUXSERVER:~/embest# tar tar jxvf jxvf jxvf Bootstrap-v1.14.tar.bz2 Bootstrap-v1.14.tar.bz2 Bootstrap-v1.14.tar.bz2 root@LINUXSERVER:~/embest# tar jxvf jxvf u-boot-1.3.4.tar.bz2...

  • Page 32: System Customization

    .3.3 The econd ooting tage tage-U-boot -U-boot -U-boot U-boot is used in the second booting stage of SBC6045, enter the following commands in the terminal, u-boot.bin will be generated under current folder. root@LINUXSERVER:~/embest/u-boot-1.3.4# make make make make at91sam9g45ekes_nandflash_config at91sam9g45ekes_nandflash_config at91sam9g45ekes_nandflash_config...
  • Page 33 Touch Touch Screen Screen Driver Driver 1.Select Device Drivers 2.Select Input device support 3.Select Touchscreens 4.Select Atmel Touchscreen Interface Save the config,compile the kernel by follow command: root@LINUXSERVER:~/embest/linux-2.6.24# make make make make uImage uImage uImage uImage Chapter Chapter Chapter 9 9 9 9...

  • Page 34: Image

    AT91BootStarp AT91BootStarp � Connect debug serial port. About hardware connects can refer to “Hardware manual of SBC6045 ”. � Connect USB to your PC using USB cable. � Make sure no SD card in the development board.
  • Page 35 Enable NandFlash NandFlash Scripts ” Enable NandFlash Pull-down menus, then click “ Execute Execute Execute Execute ”. Shown in the figure below: SBC6045 User User Manual Manual Rev. Rev. Rev. 1. 1. 1. 1.2 2 2 2 User User Manual Manual Rev.
  • Page 36 Scripts ” Pull-down menus, select “ Erase Erase Erase All All ”, and click “ Execute Execute Execute ”, wait for a moment, you can see nandflash will be erased. SBC6045 User User Manual Manual Rev. Rev. Rev. 1. 1. 1. 1.2 2 2 2...
  • Page 37 Scripts ” Pull-down menus, select “ Scrub Scrub Scrub NandFlash NandFlash NandFlash ”, and click “ Execute Execute Execute ”, wait for a moment, you can see nandflash will be Erased. SBC6045 User User Manual Manual Rev. Rev. Rev. 1. 1. 1. 1.2 2 2 2...
  • Page 38 Scripts ” Pull-down menus, select “ Send Send Send Boot Boot Boot File File File ”, and click “ Execute Execute Execute ”. Figure 9.3.7 SAM-BA burn nandlash_at91sam9g45ekes.bin SBC6045 User User Manual Manual Rev. Rev. Rev. 1. 1. 1. 1.2 2 2 2 User User Manual Manual Rev.
  • Page 39 20000 � Enter the downloader address of U-boot in the “ address address address ” field: “ 0x 0x20000 20000 20000 ” SBC6045 User User Manual Manual Rev. Rev. Rev. 1. 1. 1. 1.2 2 2 2 User User Manual Manual Rev.
  • Page 40 Send Send File File File Name Name Name ” browse window, click “ open open open folder folder folder ” button. SBC6045 User User Manual Manual Rev. Rev. Rev. 1. 1. 1. 1.2 2 2 2 User User Manual Manual Rev.
  • Page 41 Burn “logo.bin” file to nandflash through SAM-BA. � address address Enter the downloader address of uImage in the “ address address ” field:” 0xA0000 0xA0000 0xA0000 0xA0000 ”. SBC6045 User User Manual Manual Rev. Rev. Rev. 1. 1. 1. 1.2 2 2 2 User...
  • Page 42 File Name Name Name ” browse window, click “ open open open folder folder folder ” button. Figure 9.3.13 SAM-BA burn logo.bin to nandflash SBC6045 User User Manual Manual Rev. Rev. Rev. 1. 1. 1. 1.2 2 2 2 User...
  • Page 43 Open the “ Send Send File File Name Name ” browse window, click “ open open folder folder ” button. SBC6045 User User Manual Manual Rev. Rev. Rev. 1. 1. 1. 1.2 2 2 2 User User Manual Manual Rev.
  • Page 44 , select “ uImage uImage uImage ”,as shown in the figure below. Figure 9.3.1.16 SAM-BA burn uImage to nandflash SBC6045 User User Manual Manual Rev. Rev. Rev. 1. 1. 1. 1.2 2 2 2 User...
  • Page 45 Click “ Tftpd “, and click the option “ Configure “ in its pulldown menu. Figure 9.3.19 Tftpd.exe config interface � Press the button Browse , the following picture will appear on the screen, select “image record”, and click “ OK “ button. SBC6045 User User Manual Manual Rev.
  • Page 46 The TFTP Server set OK. Figure 9.3.22 Tftpd server running � Turn on the target board power, when the U-Boot enter the countdown, press the space key of the keyboard. Then U-Boot enter download image mode. SBC6045 User User Manual Manual Rev.
  • Page 47 You can enter the following command to start Qtopia application process. 1. Enter the following command procedures for the implementation of touch screen calibration: ts_calibrate ts_calibrate [root@Mini6045:/]# ts_calibrate ts_calibrate Follow the on-screen prompts, click the “+” icon five times to complete the calibration. SBC6045 User User Manual Manual Rev. Rev.
  • Page 48 SBC6 45 User User Manual Manual 2. you can start the Qtopia application process with the following command. [root@Mini6045:/]# qpe Then the following pictures will be shown. SBC6045 User User Manual Manual Rev. Rev. Rev. 1. 1. 1. 1.2 2 2 2...

  • Page 49: Part Wince6.0

    Dataflash or NAND flash, and they can directly run in SDRAM; while the files in .bin format must first be converted into .nb0 files by EBOOT running on SBC6045 main board nb0, then they are burnt to Dataflash or NAND flash.
  • Page 50 11.3 Principle SBC6045 WinCE WinCE 6.0 At prsent SBC6045 WinCE 6.0 BSP Support NAND flash boot .booting flow chart as follow: Figure11.3.1 The ROOMBOOT Code fixed inside the CPU will automatically running after power on, The ROMBOOT will check if there is a valid BOOTLOADER in nandflash. If yes the ROMBOOT programer will copy the BOOTLODER to the SRAM inside of the CPU and execute it .
  • Page 51 SBC60 0 0 0 45 User User Manual Manual SBC6 45 User User Manual Manual figure 11.4.1 NANDFLASH memory mapping as follow： Figure 11.4.2 SBC6045 User User Manual Manual Rev. Rev. Rev. 1. 1. 1. 1.2 2 2 2 User User Manual Manual Rev.
  • Page 52 Important: if you use EBOOT, the user booting code on SBC6045 main board to WinCE system image file NK, the actual process will be, EBOOT, the user booting code on SBC6045 main board will first download WinCE system image file NK.bin that VS2005 WinCE 6.0 generates from TFTP server running on development workstation to SDRAM on SBC6045 main board via net cable, then the file will be converted into NK.nb0 before being burnt to NAND flash.
  • Page 53 Connect Connect ” button as shown in Figure 12.2.2,enter the interface as show in Figure 12.2.3 below. Figure 12.2.3 As show in Figure 12.2.4 in the Scripts pulldown menu of SAM-BA v2.9, select Enable SBC6045 User User Manual Manual Rev.
  • Page 54 User Manual Manual NandFlash, and click Execute button in the column Scripts to enable NAND flash on SBC6045 board. After the Enable operation is successful, the interface as shown in Figure 12.2.4 will appear: Figure 12.2.4 As shown in Figure 12.2.5 in the Scripts pulldown menu of SAM-BA v2.9, select Erase All , click Execute button in SAM-BA v2.9, SAM-BA v2.9 will automatically erase entire NAND...
  • Page 55 Figure 12.2.5 Select Send Boot File button in the Scripts pulldown menu of SAM-BA v2.9 , click Execute button in SAM-BA v2.9, and open file dialog box as shown in Figure 12.2.6 will pop up in SAM-BA2.9. SBC6045 User User Manual Manual Rev.
  • Page 56 As shown in Figure 12.2.6, select FIRSTBOOT.nb0 file under the path \03 WinCE 6.0 Kit\00 Image\ in SBC6045 CD in the open file dialog box of SAM-BA v2.9, then click Open button in open file dialog box of SAM-BA v2.9, SAM-BA v2.9 will automatically start burning FIRSTBOOT.nb0 file to the beginning of 0x00000000 address of NAND flash on SBC6045...
  • Page 57 As shown in Figure 12.2.8, enter address 0x80000 in the Address: field in Download/Upload File of SAM-BA v2.9. Select SBC6045 CD \03 WinCE 6.0 Kit\00 Image \EBOOT.nb0 file in the text box Send File Name:, then click Send File button in Download/Upload File of SAM-BA v2.9, SAM-BA v2.9 will start burning EBOOT.nb0 file to the beginning of 0x80000...
  • Page 58 SBC6 SBC6 SBC60 0 0 0 45 User User Manual Manual SBC6 45 User User Manual Manual Figure 12.2.8 SBC6045 User User Manual Manual Rev. Rev. Rev. 1. 1. 1. 1.2 2 2 2 User User Manual Manual Rev. 58 58 58 58 of of of of 92 92 92 92...
  • Page 59 Download/Upload File of SAM-BA v2.9, SAM-BA v2.9 will start burning NK.nb0 file to the beginning of 0x000200000 address of NAND flash on SBC6045 board. After the burning is successful, the interface as shown in Figure 12.2.11 will appear: (it takes 3-10 minutes to burn NK.nb0 file.) .
  • Page 60 SBC6 SBC6 SBC60 0 0 0 45 User User Manual Manual SBC6 45 User User Manual Manual Figure 12.2.10 SBC6045 User User Manual Manual Rev. Rev. Rev. 1. 1. 1. 1.2 2 2 2 User User Manual Manual Rev. 60 60 60 60 of of of of 92 92 92 92...
  • Page 61 69 into 980. This Section expounds how to update WinCE 6.0 operating system image file NK of through CEDownload.exe of SBC6045. Connect Debug serial port J23 of SBC6045 to serial port of development workstation using serial port cable supplied with SBC6045. Run SBC6045 CD \03 WinCE 6.0 Kit\04 Tools \dnw.exe in development workstation,setting the communication parameter as 115200 8N1.
  • Page 62 Manual Figure 12.3.1 As shown in Figure 12.3.1, select NK.bin regenerated by SBC6045 WinCE 6.0 project or the NK.bin File regenerated by SBC6045 WinCE 6.0 project .Here I select NK.bin file provided in CD. As shown in Figure 12.3.2, select NK.bin file, the interface of CEDowload.exe will appear as shown in Figure 12.3.2.
  • Page 63 SBC60 0 0 0 45 User User Manual Manual SBC6 45 User User Manual Manual Figure 12.3.2 Power on SBC6045,enter space key enter EBOOT menu setting the SBC6045 config as follow figure show : Figure 12.3.3 SBC6045 User User Manual Manual Rev. Rev.
  • Page 64 Enter the lowercase letter “d” in EBOOT menu, the system will start to download WinCE system image file NK.bin to SDRAM of SBC6045 via net cable, you will see the SBC6045 serial port output information as shown in Figure 12.3.4 will appear in DNW tool.
  • Page 65 SBC6 45 User User Manual Manual Figure 12.3.5 Figure 12.3.6 After the downloading progress is completed,the system will automatically run, as shown in Figure 12.3.7. SBC6045 User User Manual Manual Rev. Rev. Rev. 1. 1. 1. 1.2 2 2 2...
  • Page 66 Modules of of of of SBC6045 SBC6045 SBC6045 SBC6045 WinCE WinCE WinCE WinCE 6.0 6.0 BSP SBC6045 WinCE 6.0 BSP consists of two parts, i.e.: the two folders, SBC6045 and ATAMEL, the SBC6045 User User Manual Manual Rev. Rev. Rev. 1. 1. 1. 1.2 2 2 2...
  • Page 67 If you need change them, please view the files and folders under the ATMEL folder by yourself. The directory tree of SBC6045 folder and the definitions of the folders and files under it are shown as below: ├─CATALOG This directory stores SBC6045.pbcxml, this file is used to view the modules in...

  • Page 68: Win Ce System

    SBC6045 CD \03 WinCE 6.0 Kit\02 Project \SBC6045.rar file to the directory D:\WINCE600\OSDesigns\ of development workstation, and unzip this file under the same directory. User can directly open the project file SBC6045.sln [under D:\WINCE600\OSDesigns\SBC6045 folder], then you can select [Build-> Build Solution] in VS2005 to start compiling the customized WinCE system.
  • Page 69 6.0 OS Design Wizard, see Figure 13.4.3: Figure 13.4.3 Click Next button in Windows Embedded CE 6.0 OS Design Wizard as shown in Figure 13.4.3, select SBC6045:ARMV4I in Board Support Packages (BSPs) as shown in Figure 13.4.4: SBC6045 User User...
  • Page 70 45 User User Manual Manual Figure 13.4.4 Click Next button as shown in Figure 13.4.4, select PDA Device in newly opened Design Templates->Available design templates, see Figure 13.4.5: Figure 13.4.5 SBC6045 User User Manual Manual Rev. Rev. Rev. 1. 1. 1. 1.2 2 2 2...
  • Page 71 Variants->Variants, see Figure13.4.6: Figure 13.4.6 Click Next button as shown in Figure 13.4.6 to open Applications & Media window, add Internet Browser->Internet Explorer 6.0 and WordPad in existing default options, see Figure 13.4.7 Figure 13.4.7 SBC6045 User User Manual Manual Rev.
  • Page 72 Personal Area Network(PAN)->Bluetooth and Personal Area Network(PAN)->IraDA from in existing default options, see Figure13.4.8: Figure 13.4.8 Click Next button as shown in Figure 13.4.8, Click finish in newly opened OS Design Project Wizard Complete, see Figure 13.4.9: SBC6045 User User Manual Manual Rev.
  • Page 73 SBC6 45 User User Manual Manual Figure13.4.9 10. Click Acknowledge in the interface as shown in Figure 13.4.10 to finish the initial customization of WinCE 6.0 OS. SBC6045 User User Manual Manual Rev. Rev. Rev. 1. 1. 1. 1.2 2 2 2...
  • Page 74 45 User User Manual Manual Figure13.4.10 11. Tick the following options under View->other windows->Catalog Items View->SBC6045->Core OS->CEBASE->Core OS Services->USB HOST Support in Catalog Items View of VS2005. USB Function Driver USB Host Support USB Human Input Device (HID) Class Driver->USB HID Keyborad and Mouse USB Storage Class Driver See as Figure 13.4.11...
  • Page 75 Device Drivers->SDIO->SDIO Host->SDIO Standard Host Controller Device Drivers->SDIO->SDIO Memory->SD Memory Device Drivers->USB Function->USB Function Clients->Mass Storage Device Drivers->USB Function->USB Function Clients->serial 13. Set compilation type as SBC6045 ARMV4I Release, see Figure 13.4.12: Figure 13.4.12 14. Click Project->SBC6045 properties in VS2005 , see Figure 13.4.13: SBC6045...
  • Page 76 Build Options, as shown in Figure 13.4.15, click OK to finish the settings of compilation. Figure13.4.15 16. As shown in Figure 13.4.16, tick the driver of the module you need SBC6045 board, in View->Other window->Catalog Items View->SBC6045->Third Party->SBC6045: ARMV4I VS2005. (For details of each driver module please refer to Section 13.5) .
  • Page 77 Manual SBC6 45 User User Manual Manual Figure 13.4.16 17. As shown in Figure 13.4.17, click Build->Advanced Build Commands->Sysgen of VS2005 to start compiling: SBC6045 User User Manual Manual Rev. Rev. Rev. 1. 1. 1. 1.2 2 2 2 User...
  • Page 78 13.5 13.5 Modules SBC6045 WinCE WinCE 6.0 6.0 BSP BSP driver driver After SBC6045 WinCE 6.0 BSP is installed and the project based on the BSP is initially customized following instructions Section 13.4, click View->Other window->Catalog Items View->SBC6045->Third Party-> SBC6045: ARMV4I in VS2005, you will see the modules of each driver module of SBC6045 WinCE 6.0 BSP, you can choose them on your demand.
  • Page 79 45 User User Manual Manual If you need use the play function of external audio chip Audio Driver AD1981 chip on SBC6045 module board, directly tick this module in system customization. If you need use CAN Bus. The driver of...
  • Page 80 SBC6045 board. SBC6045 touch Touch screen function support screen driver directly tick this module in system customization. USB Device SBC6045 USB Device support . driver on directly tick this module in system SBC6045 customization. SBC6045 User User Manual Manual Rev.
  • Page 81 EBOOT menu menu Connect Debug serial port J27 of SBC6045 main board to serial port of development workstation using the serial port cable supplied with SBC6045 main board, open CD\ 03 WinCE 6.0 Kit\04 Tools\dnw.exe see Figure 13.6.1. Figure 13.6.1...
  • Page 82 Figure13.6.3 Power on SBC6045 main board, SBC6045 serial port print information display enter countdown stage (the default countdown time is 5S after power-on of SBC6045 main board). Press SPACE key on DNW interface of development workstation, the moment SBC6045 EBOOT serial port output information as shown in Figure13.6.4 will appear:...
  • Page 83 Table13.7.1 EBOOT menu commands Command Items Functions Mac address ..(00:12:72:72:20:20) To set SBC6045 MAC Address Ip address ... (192.192.192.1) SBC6045 address Subnet Mask address .. (255.255.255.0) To set SBC6045 subnet mask. DHCP ....(Disabled)
  • Page 84 The IP address of SBC6245’s IP is the IP address that set by command 1. Operating Operating Operating Operating instructions: instructions: instructions: instructions: enter “3” in EBOOT menu, the 3rd item will shift between SBC6045 User User Manual Manual Rev. Rev. Rev. 1. 1. 1. 1.2 2 2 2...
  • Page 85 NAND flash, directly launch it in SDRAM and run the system. Launch existing flash resident image at startup （command 7） Functions: Functions: Functions: Functions: Command 7 decides whether EBOOT directly launch NK of NAND flash or download SBC6045 User User Manual Manual Rev. Rev.

  • Page 86: Value

    Enter the information found in the build report of the 'Make Image'. [entering 0 keeps present value] Physical Start Address : (0x8006c000) : 0x Here we enter the default value 0x8006c000 and press ENTER, the moment the following information will appear in DNW: SBC6045 User User Manual Manual Rev.
  • Page 87 EBOOT launch system, if they are incorrect, the system will not be launched normally. User can also execute the following steps to view the three parameters of NK. After the compilation of SBC6045 project based on SBC6045 WinCE 6.0 is successful, click ->Open Release Directory in Build Window in VS2005. See Figure 13.7.1 Figure13.7.1...
  • Page 88 SBC6 45 User User Manual Manual Enter viewbin nk.bin in the opened SBC6045 ARMV4I Release command window as shown in Figure 13.7.2, relevant information of NK will be displayed. Figure 13.7.2 Physical Start Address 即 Image Start Starting ip 即 Starting address Total ROM size 即...
  • Page 89 SBC60 0 0 0 45 User User Manual Manual SBC6 45 User User Manual Manual Similar products SBC6245 SBC6345 SBC6045 User User Manual Manual Rev. Rev. Rev. 1. 1. 1. 1.2 2 2 2 User User Manual Manual Rev. 89 89 89 89 of of of of 92 92 92 92...
  • Page 90 Embest provide one year free technical support service for all products Embest is selling. Technical support service covers: • Embest embedded platform products software/hardware materials • Assist customers compile and run the source code we offered •...

  • Page 91: Services

    3. During the warranty period, the deliver fee which delivery to Embest should be covered by user, Embest will pay for the return delivery fee to user when the product was repaired. If the warranty period is expired, all the deliver fees will be charged by users.
  • Page 92 Address Address Address: Tower B 4/F, Shanshui Building, Nanshan Yungu Innovation Industry Park, Liuxian Ave. No. 1183, Address Taoyuan St., Nanshan District, Shenzhen, China (518055) SBC6045 User User Manual Manual Rev. Rev. Rev. 1. 1. 1. 1.2 2 2 2...

Table of Contents