Ucos System Demonstration; Display Mode Configurations Of Linux&Android System - Embest MarS Board User Manual

Embest Technology

4.2 UcoS System Demonstration

UcoS system is used for demo, do not support the source code
The steps of how to download and run UcoS are as below:
1） Download
http://www.embest-tech.cn/shop/product/mars-board.html, copy u-boot.bin
and uImag files to C:/tools/Mfgtools-Rel-12.04.01_ER_MX6Q_UPDATER
\Profiles\MX6Q Linux Update\OS Firmware\files\ to overwrite the files with
the same names
2） Refer to the method of downloading linux image that described in chapter
4.1 to download UcoS system image.
3）
Copy all of the files under ucos to TF card, insert the TF card into Mars
Board, connect 7" LCD and HDMI TV, and then power on the board, the dual
OS running concurrently. The UcoS system will display on 7" LCD, Ubuntu
system will display on HDMI TV.
Figure 4-4 The required files for running UcoS demo
4.3 Display Mode Configurations of Linux&Android
System
The system supports multiple display modes. Users can select an appropriate mode by
cofiguring u-boot parameters.Please reboot the kit and press any key on your PC's
keyboard when the system prompts you with a countdown in seconds as shown below:
Copyright © 2014 Embest Technology
the UcoS
27
demo from
MarS Board User Manual