Drive Indicator Codes - Dell EMC VxRail P580N Owner's Manual

Table 6 DC PSU status indicator codes (continued)
Power indicator codes

Drive indicator codes

Each drive carrier has an activity LED indicator and a status LED indicator. The indicators provide
information about the current status of the drive. The activity LED indicator indicates whether the
drive is currently in use or not. The status LED indicator indicates the power condition of the drive.
Figure 9 Drive indicators
1. Drive activity LED indicator
2. Drive status LED indicator
3. Drive
The drive indicator codes table describes the indicator codes: flashing green twice per second, Off,
flashes green, amber, and then turns off, flashes amber four times per second, flashes green
slowly, solid green, flashes green for three seconds, amber for three seconds, and then turns off
after six seconds.
Table 7 Drive indicator codes
Drive status indicator code
Flashes green twice per second
Off
Note: If the drive is in the Advanced Host Controller Interface (AHCI) mode, the status LED
indicator does not turn on.
Dell EMC VxRail Appliances on Dell PowerEdge Servers VxRail P580N Owner's Manual
Condition
CAUTION If two PSUs are used, they
must be of the same type and have the
same maximum output power.
CAUTION Combining AC and DC PSUs is
not supported and triggers a mismatch.
Condition
Identifying drive or preparing for removal.
Drive ready for removal.
Product overview
17