Power Supply Unit Indicator Codes - Dell EMC VxRail P580N Owner's Manual

Product overview
The NIC indicators table describes different NIC indicator codes and condition of the connectivity.
Table 4 NIC indicator codes
Status
Link and activity indicators are off.
Link indicator is green, and activity
indicator is blinking green.
Link indicator is amber, and activity
indicator is blinking green.
Link indicator is green, and activity
indicator is off.
Link indicator is amber, and activity
indicator is off.
Link indicator is blinking green, and
activity is off.

Power supply unit indicator codes

AC power supply units (PSUs) have an illuminated translucent handle that serves as an indicator.
The DC PSUs have an LED that serves as an indicator.
The indicator shows whether power is present or if a power fault has occurred.
Figure 7 AC PSU status indicator
1. AC PSU status indicator/handle
This table describes the AC PSU status indicators and the condition of the PSU when the power
indicator light is green, blinking green, blinking amber, and when it is not lit.
Table 5 AC PSU status indicator codes
Power indicator codes
Green
Blinking amber
Not illuminated
Dell EMC VxRail Appliances on Dell PowerEdge Servers VxRail P580N Owner's Manual
14
Condition
The NIC is not connected to the network.
The NIC is connected to a valid network at its
maximum port speed, and data is being sent or
received.
The NIC is connected to a valid network at less than
its maximum port speed, and data is being sent or
received.
The NIC is connected to a valid network at its
maximum port speed, and data is not being sent or
received.
The NIC is connected to a valid network at less than
its maximum port speed, and data is not being sent
or received.
NIC identify is enabled through the NIC
configuration utility.
Condition
A valid power source is connected to the PSU,
and the PSU is operational.
Indicates a problem with the PSU.
Power is not connected to the PSU.