Using The Operation Bar - Panasonic CQ-DF602U Operating Instructions Manual

1.5.4

Using the Operation Bar

(1)
(2)
(3)
(4)
(5)
(6)
(1) End Display and Preset Display: When the pan/tilt
has reached the end of its range, the End Display (Left
End, Right End, Up End or Down End) appears. When
the zoom or focus operation has reached the end, Wide
End, Tele End, Near End, or Far End appears. When you
select a preset, the preset name appears.
(2) Pan Scan/Tilt Scan: Moves the lens throughout the
horizontal ( ) or vertical (
original position.
(3) Pan/Tilt/Home Position: Controls lens direction.
Pan ( : Left,
Home Position (
(4) Zoom Buttons: Zooms in or out on the camera
image.
(5) Focus Buttons: Used to adjust the focus.
(6) Home Position, Alarm Position, Preset Position:
Applies the camera direction to a preset position. You can
preset 20 positions (see page 30—page 33).
When the External I/O detects a signal, the camera can
be set up to turn to the position of Alarm 1 or Alarm 2.
Only an administrator can operate it (see page 30).
) range, and returns to the
: Right), Tilt ( : Up,
: Center [Default])
Operating Instructions
: Down) and
23