Configuring Multiple Cameras - Panasonic CQ-DF602U Operating Instructions Manual

Operating Instructions
5.2

Configuring Multiple Cameras

The Multi-Camera Setup page allows you to configure camera IP addresses and
camera names to view multiple images on the Multi-Camera page. These
configurations are required to use the Multi-Camera page. Up to 12 cameras can
be configured. The Selfcamera is registered at No. 1 by default.
1.
Click [Multi-Camera] on the Setup page.
2.
Click Add.
Note
• If you click the camera number, the modification page is displayed. The
camera settings can be modified or deleted here.
• If you configured multiple cameras, you can change the camera number.
Select the number, and click [Move].
3.
Set each parameter.
• Clicking [Cancel] cancels your settings without saving changes.
• By clicking [Clicking this link, enters this camera's settings.], the settings
of the Selfcamera are entered automatically. "--" is displayed as the Port
No, and the model no. is displayed as the Camera Name.
148