Buffering Or Transferring Images By Timer - Panasonic CQ-DF602U Operating Instructions Manual

4.2

Buffering or Transferring Images by Timer

The Trigger page allows you to enable image buffer/transfer by E-mail or FTP.
Note
• If you are recording images to the SD memory card, refresh interval slows
down.
1.
Click [Trigger] on the Setup page.
2.
Click a No. to enable buffer/transfer.
3.
Check [Enable Image Buffer/Transfer], select [Timer] for the trigger, and click
[Next>].
• Click [Delete Buffered Images] to delete images already buffered.
• Click [Save] to save the settings.
• Clicking [Cancel] takes you back to the Trigger page without saving
changes.
Note
• If you click [Save], all buffered images on the SD memory card are
deleted.
Setting
Enable Image
Buffer/Transfer
• Check the box to enable the buffer/transfer. Uncheck the
box to disable it.
Description
Operating Instructions
97