Panasonic CQ-DF602U Operating Instructions Manual page 185

Note
• See page 17 for the Single Camera page.
• If you will enable Internet access to the camera, follow the procedures
below.
• When you are using a router that supports UPnP™
1.
Enable the Auto Port Forwarding feature on the UPnP page (see page
67)
2.
Register with the DynamicDNS service on the DynamicDNS page
(see page 70)
3.
Confirm that the camera can be accessed from the Internet (see page
13). If you cannot access the camera, see page 10 of the
Troubleshooting on the CD-ROM.
• When you are using a router that does not support UPnP™
Follow the procedures shown on page 68.
Operating Instructions
185