Panasonic CQ-DF602U Operating Instructions Manual page 111

Setting
Enable Post-
trigger Image
Buffer
8.
Select the transfer method, and click [Next>].
• Clicking [<Back] takes you back to the previous page.
• Clicking [Cancel] takes you back to the Trigger page without saving
changes.
Note
• If you transfer images by E-mail or FTP, confirm that the default gateway
and DNS server addresses are assigned correctly (see page 48 or page
53).
Setting
No Transfer, No
Memory
Overwrite
No Transfer,
Memory
Overwrite
FTP
E-mail
• Check the box to enable the setting. The camera buffers or
transfers the image right after the alarm signal is detected.
• Set an interval, number of images to buffer and total
number. The number of buffered images may not match
the total number (see page 191) due to memory capacity,
image resolution, image quality or what object you view.
• If the internal memory or the SD memory card is full, the
camera stops buffering.
• If the internal memory or the SD memory card is full, the
camera deletes the old images, and continues to buffer the
image.
• The camera transfers the image to an FTP server (see
page 112).
• The camera transfers the image by E-mail (see page 114).
Description
Description
Operating Instructions
111