Other Information; Factory Default Reset Button - Panasonic CQ-DF602U Operating Instructions Manual

Operating Instructions
7

Other Information

7.1

FACTORY DEFAULT RESET Button

There is a FACTORY DEFAULT RESET button on the bottom of the camera.
BB-HCM381A
Pressing the FACTORY DEFAULT RESET button resets the camera to factory
default. If you lose your user name and password, use this button to reset the
camera.
• To reset the camera, press the FACTORY DEFAULT RESET button for 1
second when the camera is on.
• The indicator blinks orange, and then turns off for 5 seconds.
Note
• The internal clock will not be reset, but the time format will return to AM/PM
mode. To change it to 24-h format, see page 77.
• See page 167 for the default settings.
• All buffered images on the internal memory are deleted when resetting the
camera to factory default. The buffered images on the SD memory card are not
deleted.
• If the camera is reset to default, all alarm logs are deleted.
• The process of resetting to default takes about 1 minute. During that time, do
not turn the power off.
166
FACTORY DEFAULT RESET button
(Press the button with a pointed object)
BB-HCE481A