Camera Monitoring; Bb-Hcm381A Feature Locations; Front View - Panasonic CQ-DF602U Operating Instructions Manual

Ac adaptor type/poe type
Hide thumbs Also See for CQ-DF602U:
Table of Contents

Advertisement

Operating Instructions
1

Camera Monitoring

1Table of Contents
1.1

BB-HCM381A Feature Locations

1.1.1

Front View

Indicator Display
Power
on
Normal Operation*
Automatic
Setup
Using
Getting IP address*
DHCP
Updating Firmware
FACTORY DEFAULT RESET
button pressed
UPnP
Internal Failure
*1 The indicator turns orange if the camera is not connected to the LAN.
*2 The indicator blinks orange if the camera is not connected to the LAN.
*3 See page 3 and 4 the Troubleshooting on the CD-ROM for information on indicator error
codes.
8
Auto Focus/Zoom Lens
Wide: 5 mm (3/16 inches) —Infinity
Tele: 1 m (3 feet 3 inches) —Infinity
Indicator
SD Memory Card Cover
Not on LAN
On LAN
1
Setting
Finished setting
2
Got IP address
TM
Failure
The indicator color shows camera status (see
page 153).
Protects the SD Memory Card from dust. Remove
the cover only when removing the SD Memory
Card (see page 140).
Orange blinking
Orange blinking
Green blinking
Green blinking
Green blinking
Orange blinking
Orange blinking
(The camera restarts after that.)
Orange blinking (About a 2-second interval)
Red blinking*
Green blinking
Green
Green
Green
Turning off
3
Green

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bb-hce481aBb-hcm381aBb-hhce481aBb-hhcm381a

Table of Contents