Setting Alarm Log Notification - Panasonic CQ-DF602U Operating Instructions Manual

4.8

Setting Alarm Log Notification

An alarm log sent once a day at a specified time can be checked. To enable Alarm
Log, set Alarm 1, Alarm 2 or Motion Detection for Trigger Setting and check
[Enable].
1.
Click [Alarm Log] on the Setup page.
• When selecting Alarm1, Alarm2 or Motion Detection in Trigger page, the
Alarm log window is displayed.
2.
Set each parameter.
3.
Click [Save].
• Clicking [Cancel] cancels your settings without saving changes.
4.
Click [Go to Alarm Log page].
Operating Instructions
137