L3 FA5000 Component Maintenance Manual With Illustrated Parts List page 172

A. Electrical Characteristics
Input Power Requirements:
Power Level:
CVR Recording Time:
FDR Recorder Time:
CVR Input Signal Format:
FDR Input Signal Format:
Audio Input Impedance:
Audio Inputs:
Audio Input Level:
Audio Quality:
Greenwich Mean Time Input Data:
Discrete Inputs:
Digital Outputs:
B. Crash- and Fire-Survival Characteristics
Penetration:
Static Crush:
Fire Protection:
Impact:
C. Environmental Characteristics
Refer to Table 801 for the Model FA5000 environmental characteristics.
Use or disclosure of information on this sheet is subject to
the restrictions on the cover page of this document.
The document reference is online, please check the correspondence between the online documentation and the printed version.
AVIATION RECORDERS
COMPONENT MAINTENANCE MANUAL
Model FA5000
28 Volts DC
11 watts typical when powered by 28 Volts DC
or for CVR only, 13 watts typical when powered by
28 Volts DC with RIPS charging. 28 Watts maximum
when powered by 28 volts DC with RIPS charging
2 Hours High Quality Voice
25 Hours Minimum of flight data
ARINC 757 or 757A
ARINC 757− 64, 128, 256, 512 or 1024 wps
> 5000 ohms each channel
3 crew microphones (150 − 3500 Hz bandwidth)
1 cockpit area microphone (150 − 6000 Hz band-
width)
50 mVrms to 3 Vrms
Meets ED112 specifications. Signal-to-noise plus
distortion ratio (SINAD) of the signal when repro-
duced > 24 dB (6 % distortion) for the most recent
30 minutes of recording, > 20 dB (10 % distortion)
otherwise
ARINC 429 Format
Bulk Erase − 2 discretes
Erase A
Erase C
Push-to-Test − 1 discrete
Record On − 1 discrete
Stop Recording − 1 discrete
CVR Fault − 1 discrete
FDR Fault − 1 discrete
ED–112 – 500 lbs./10 feet/
ED–112 – 5,000 lbs.
TSO–C123b/ED–112 – 50,000 BTU/sq. feet/hour, 60
minutes @ 1100_C and 10 hours @ 260_C
ED−112 – 3400 g's, 6.5 ms, half-sine shock wave
!@ 4
" probe
23–70–40
Fits and Clearances
Initial Issue Page 802
Rev. 04 Page 802
Sep. 30/11
Mar. 21/14