Connections; Charge The Integrated Lipo Battery - GRAUPNER S8405 Manual

Interfaces
1 Video Out receiver A
2 Video Out receiver B
3 Video Out receiver A + B
4 Video In
5 Current source port

Charge the integrated LiPo battery

CAUTION
!
S8405_jh_V1
1
2
3
4
5
RF A RF B
General notes on safety and handling LiPo batteries
• Never leave a LiPo battery unattended when in charge.
Charge the batteries only in rooms where a smoke detector
is installed.
• Always control the battery and the charger during the entire
charge process.
• Always charge the LiPo batteries on a non-flammable sur-
face.
• Always keep an extinguisher suitable for Lithium "Class type
D" when charging LiIo batteries.
• Never charge the LiPo battery with a charger which does not
detect the full charge state of the battery.
• Always interrupt the charge or discharge process of a LiPo
battery if you detect smoke or if the battery slowly inflates.
Let the battery stay for at least 30 minutes in a fire-safe
place. Do not use the battery any more and dispose it as
indicated.
• Charge
• To charge the internal 2450 mAh LiPo battery, you need a
suitable 7 - 12 V DC net adapter (not included in the pack-
age content).
• Plug the net adapter in a suitable net socket, then connect
the plug in the "DC IN" port of the monitor.
• During charge the charge status LED (on the left near the
buttons) lights on red. When the charge process has fin-
ished, the LED lights on blue.
G RO U P /+ C HANN E L /- ME UN SEA R CH S O URCE
P OWER
7- 12