Intended Use; Package Content; Technical Data - GRAUPNER S8405 Manual

Intended use

Package content

Technical Data

S8405_jh_V1
The Graupner 7" Receiver Monitor is suitable to reproduce images
from FPV cameras signal or to playback videos or images from
external sources. The integrated 5,8 GHz receiver receives the
video signal sent by the FPV transmitters installed in the model.
For any improper use no warranty or liability is accepted.
Read through this entire manual before you attempt to install or
use the Graupner 7" Receiver Monitor.
Graupner/SJ constantly works on the development of all prod-
ucts; we reserve the right to change the item, its technology and
equipment.
Target group
The product is not a toy. It is not suitable for children under 14
years. The operation of the Graupner 7" Receiver Monitor must be
performed by experienced users. If you do not have sufficient
knowledge about dealing with radio-controlled models, please
contact an experienced users or a dealer.
Graupner 7" Diversity Monitor incl. LiIo battery
Screen shroud
2x 5.8GHz receiver antennas
12V DC cable with BEC plug
2x AV out cable
Screen dimensions: 7" (inches) / 178 mm
Dimensions: 180 x 120 x 50 mm
Resolution: 800 x 480 Pixel
Screen type: TFT LCD Monitor, LED backlight
Luminosity: 450 cd/m2
Holder: tripod thread / sliding insert
Frequency: ISM 5.8 GHz
Operating voltage: DC-IN 7- 12 V
Battery: 2450mAH LiPo battery
Weight: ca. 420g
Operating temperature: 10° C ~ 65° C
5- 12