Kenmore SELECT CLEAN 665.75822 Use & Care Manual page 28

USING THE SELECT CLEAN™ SELF-CLEANING CYCLE
SETTING THE CONTROLS (contd.)
5.
After the oven is cool, wipe off any residue or ash
To delay start the Self-Cleaning cycle:
NOTE: Make sure the clock is set to the correct
time of day. (See "Setting the clock" in the "Using
Your Range" section, p. 12.)
1.
Press SELECT CLEAN.
Press pad twice, SoilA (for average soil) will
replace SoilL.
Press pad three times, SoilH (for heavy soil) will
replace SoilA.
NOTE: You can scroll through all 3 settings
(SoilL, SoilA and SoilH) continuously by pressing
SELECT CLEAN.
2.
Press DELAY START.
3.
Set the start time.
Press the HOUR/MIN (s) or (t) pad(s) until the
correct time of day to start the SELECT CLEAN
Self-Cleaning cycle shows on the display.
4.
Press START/ENTER.
5.
Once Delay Start time has been reached, the
oven begins the SELECT CLEAN™ Self-Cleaning
cycle.
28
with a damp cloth or sponge.
If needed, touch up spots
with a mild abrasive cleanser
or cleaning sponge.
PRESS YOU SEE
SELECT
CLEAN
(example shows light soil
setting)
PRESS YOU SEE
PRESS YOU SEE
(example for 12:30 start time)
PRESS YOU SEE
YOU SEE
(example shows light soil setting)
CLEAN
CLEAN
START
ON
DELAY LOCKED CLEAN
HEAT
ON
LOCKED CLEAN