Table of Contents
Advertisement
Filling Disinfectant
The user should fill the robot with disinfectant if the robot indicates that the liquid level is too low.
The filling port is located at the rear side of the machine body. Lift the silicone cover, press the blue
knob, and then rotate counterclockwise to open the cover, as shown in fig. 4.
Fig. 4 Partial enlarged detail upon opening the outer silica gel cover of the liquid filling port
Description on state of indicator light
Indicator light state
Blue breathing light (slow blinking)
Blue operation lamp (rotating)
Blue Warning Light (fast blinking)
Orange breathing light (slow blinking)
Meaning
The robot is in standby state. The spraying device and the
ultraviolet lamp are not on.
The robot is in operation, with spraying device or ultraviolet
lamp on.
Warning, ultraviolet lamp will be turned on soon.
The robot is lack of disinfectant. Please fill in disinfectant, or the
spraying device cannot work.
12
Advertisement
Table of Contents
