Table of Contents
Advertisement
Handling robot
Robots are expensive equipment. Please strictly follow the instructions bellow when moving robots
manually.
As shown in fig. 6, the upper part of the robot laser layer gap (the surface indicated by the arrow) is
the force-bearing part, through which you can lift the robot. Please hold the upper part of the laser
layer with your hands when handling. Please keep the robot upright all the time when handling.
Fig. 6 Schematic diagram for handling the robot
* Note:
The laser layer gap is the only force-bearing part of the robot to be handled. When moving robots,
you should strictly follow the instructions. It is strictly prohibited to directly pull and lift the bottom
of the robot, turn over the robots, or directly lift the robot's face and head. The damage to the robot
caused by improper operation during handling shall be borne by the user.
14
Advertisement
Table of Contents
