Software Installation; Installation Checklist; Composer Tool - Siemens NK8237 MP4.81-01 Installation Manual

Software installation

6

Installation checklist

8 Software installation
8.1
8.2
32
Building Technologies
CPS Fire Safety
The software installation includes the following:
Composer and basic tools for system configuration.

Additional tools: NW8202 (for IP configuration download), NW8204 (for

maintenance and diagnostic), NK823x Web Server (for NK8237 diagnostic
information and IP configuration).
IEC GW Add-on installation

Installation checklist
Items needed for the installation
DMS8000 DVD

DMS8000 Service key (dongle) - not required for Composer GW Tool

(NK8237) setup type
Service key license PAK code (or the REG file that contains it) - not required

for Composer GW Tool (NK8237) setup type
IEC GW Add-on: MM8000 MP4.81 - Addon N.10 (IEC GW - V.1.01) - CD

Installation checklist
1. Install the Composer Software and, if required, the license key and PAK.
If necessary, you can refer to the following documentation:
Composer Technical Manual
–
MM8000 Installation, Configuration & Commissioning
–
DMS8000 Network Connectivity Guide
–
MM8000 Release Notes
–
3. Install the NK8237 unit and configure the IP address of the NK8237 unit, you
can use the NK823x Web Server [➙ 36] (that is pre-installed on the SD card of
the NK8237 units or can be installed during the update of the kernel [➙ 69]) or
install the NW8202 tool [➙ 38].
4. Install the NK8237 IEC GW Add-on [➙ 33].
5. Update the NK823x firmware [➙ 64]:
First download the firmware NK823x_4.81_Build_6x, and as second step the
AddOn_NK8237_IEC_Build_1x
6. If required for diagnostics, install the NW8204 tool [➙ 39].

Composer tool

Composer tool can be installed using the standard DMS8000 DVD.
If only NK8237 commissioning is needed, you can choose the Composer GW Tool
(NK8237) installation option, which is a light version of Composer with only the
functionalities required for commissioning. The Composer GW Tool version needs
no license.
A full-feature version of Composer is installed along with the following installation
types, all requiring a license:
Composer and Subsystem Tools. This option installs the standard version of

Composer with all functionalities required to commissioning MM8000, MK8000
or NK8000 products.
Stand-alone (MM8000). This option installs the MM8000 Server and Client and

the standard version of Composer with all functionalities required to
commissioning MM8000 and NK8000 products.
(A6V10062401)
(A6V10359485)
(A6V10062509)
(A6V10062413)
A6V10854379_a_en
30.11.2017