Siemens NK8237 MP4.81-01 Installation Manual page 50

Configuration
7
Creating the NK8237 Gateway
50
Building Technologies
CPS Fire Safety
Routing table configuration
Checking the routing table
 The configuration has been downloaded to the NK8237 unit.
1. Select the NK8237 node.
2. In the Routing tab, click the Get Info button to upload the routing configuration
from the selected NK8237 unit.
– The updated information populates the list in the Routing Info section.
3. Check that the uploaded table actually matches the configured table.
Inconsistencies will indicate a configuration error or network problems.
 At this point, you can be sure that the unit can access the external subnets
over the configured routes.
Note: Use the Ping button in the Tools tab to check the actual connectivity
between the unit and IP devices on the subnets.
A6V10854379_a_en
30.11.2017