Abnormality Linkage - Kedacom IPC4X1 Series User Manual

High Speed Dome Camera
3) Enter alarm name. If the alarm input device is always disabled, which means the circuit is usually
open, user must select "Always Disabled" from the dropdown list of Alarm Type. If the alarm input
device is always enabled, which means the circuit is usually loop, user must select "Always Enabled"
from the dropdown list of Alarm Type. The default setting is "Always Disabled".
4) Duration: Click the white bar behind each weekday and drag mouse to make a blue bar as the task
duration for that day. Select the blue bar and adjust or delete duration by mouse. Check several
weekdays or "Select All" and click "Copy" to copy the defined motion detection durations to the days;
Check "Linkage Method".
5)
Click "Save".
6)
4.3.11

Abnormality Linkage

Abnormality linkage means the linkage triggered when abnormality occurs. Abnormality type includes Disk
Full, Disk Error and Internet Disconnected.
Setting steps:
Go to Settings > Event > Abnormality Linkage, and check "Enable".
1)
2) Select type from the dropdown list of Abnormality Type.
Picture 4-18 Alarm input
User Manual
30