Abnormality Linkage - Kedacom IPC524 Series User Manual

Long-Range Medium-Load PTZ Camera
2) Please select an option from the dropdown list according to actual request. Options vary from
"Without Delay" to "10 min", and the default is 5s. After the "Delay Time", the alarm will be
cancelled automatically;
Note: The default duration of alarm output is 5s, and the delay time means the prolonged
period of time after the default 5s.
Click "Save" to validate setting.
3)

6.4 Abnormality Linkage

Configure the alarm linkage method for abnormal events, and the camera will judge if it is
necessary to trigger an alarm. Configuration steps are as follows:
1) Go to Settings > Abnormality Linkage;
2) Select "Enable";
3) Select an option from the dropdown list of Abnormality Type;
Note:

Disk Full: when the disk storage is insufficient.

Disk Error: when the disk cannot be recognized.

Internet Disconnected: when the device isn't connected to the internet normally.
4) Select linkage type(s), which is/are the alarm output method(s) when an event triggers an
alarm;
5) Click "Save" to validate settings.
Picture 6-27 Abnormality Linkage
94
User Manual