Mitsubishi Electric MELSEC iQ-R Series Quick Start Manual page 44

The "Launch Configuration Selection" screen appears on and after the second operation of the step 2.
Select "Launch the selected launch configuration", and click the [OK] button.
■Debugging the user program
Operating procedure
1.
Select the created project in the "Project Explorer" window, and click the [] button on the right side of
2.
Select [Debug Configurations].
The "Debug Configurations" screen appears.
3.
Click the downloaded module "R12_SampleProject.out" under "VxWorks Kernel Task".
2 USING C CONTROLLER MODULE
42
2.5 Programming
on the toolbar.