10.
Variable values can be checked and changed in the "Variables" window on the bottom right of the screen.
Check that 'sRet', return value of the CCPU function, is '0' (normal value) in this step.
(a) Run the programs to the line indicated with the red arrow '→' by the step execution in step 9.
(b) Check that the value of sRet is '0' (normal value) in the [Variables] tab.
(a)
Repeat steps 9 and 10 to debug the whole created program.
When the return value of the C Controller module dedicated function is other than '0', refer to the following
manual and troubleshoot the symptom.
MELSEC iQ-R C Controller Module Programming Manual
(b)
2 USING C CONTROLLER MODULE
2.5 Programming
2
45