Advertisement
780 Handheld Test Instrument
1.
Follow the procedures above (Rendering Test Patterns on an HDMI HDTV) for rendering a Test Pattern on an
HDMI HDTV.
2.
Connect the far end of the HDMI cable (at the display or HDTV) to the 780 HDMI IN connect.
3.
Touch select Cable/Repeater Test from the top level menu shown below.
The following screen appears:
4.
Select Frame Capture to capture a reference frame.
The 780 will capture a frame and indicate that the +5V was detected properly or not. The screen below shows these
results.
Quick Start Guide
Page 88
Revision A19
- Quick Links:
- Overview of the 780 Handheld Test...
Hide quick links:
Advertisement
Need help?
Do you have a question about the 780 and is the answer not in the manual?