Delivery Measures; Measures Before Delivery; Fastening Steering Wheel; Fastening Seat - Husqvarna Rider 850 Workshop Manual

Measures before delivery

A Husqvarna Rider is delivered from the factory on
a pallet and wrapped in plastic. For reasons of
space, certain measures must be carried out on the
ride-on mower before it can be delivered to the
customer.
The following must be carried out by the dealer
before delivery:
• The steering wheel must be fastened.
• The seat must be fastened.
• On Rider 850, the support wheels are to be
fastened on the mowing deck.
• Safety guard is to be fastened on Rider 1030
Bioclip and Rider 1200.
• The battery must be filled with battery acid before
it is used.

Delivery measures

Fastening steering wheel

• Fasten the steering wheel with steering column
• Tighten the socket head cap screw, make sure
• Securely lock the socket head cap screw with

Fastening seat

Insert the seat pin through the hole in the frame and
seat attachment and fasten spring pin.
on the steering shaft.
that it sits in its groove on the steering shaft.
the locking nut.
IMPORTANT INFORMATION
On Rider 1030 Bioclip and Rider 1200 the
safety system contact is to be assembled
under the seat. Check the correct
functioning of the contact after delivery
measures have been carried out. The
machine should not function if there is no-
one sitting in the driver's seat.
5
English –