2.1 Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING: Used if there is a risk of injury or
death for the operator or bystanders if the
instructions in the manual are not obeyed.
CAUTION: Used if there is a risk of damage to
the product, other materials or the adjacent area
if the instructions in the manual are not obeyed.
Note: Used to give more information that is necessary in
a given situation.
2.2 General safety instructions
WARNING: Apply a new warning label if a
warning symbol on the product is damaged or
2.3 Symbols on the product
WARNING! This product can be
dangerous! Careless or incorrect use can
result in serious or fatal injury to the
operator or others. It is extremely
important that you read and understand
the contents of the operator's manual.
Please read the operator's manual
carefully and make sure you understand
the instructions before the product is
Use a protective helmet in locations where
objects can fall on you. Use approved
hearing protection. Use approved eye
Maximum speed of the output shaft.
Rated voltage, V
The product can cause objects to eject,
which can cause injury.
The product agrees with the applicable
4 - Safety
Use approved protective gloves.
Use heavy-duty slip-resistant boots.
Only use non-metallic, flexible cutting
attachments, i.e. trimmer heads with
Symbols on the product or its packaging
indicate that this product cannot be
handled as domestic waste. This product
must be deposited at an appropriate
The operator must ensure that no people
or animals come closer than 15 metres.
When several operators are working at
the same site a safety distance of at least
15 metres must be in effect. The
attachment can forcibly throw objects that
can bounce back. This can result in
serious eye injuries if the recommended
safety equipment is not used.
Do not use in rain.
Keep all parts of your body away from the
Noise emission to the environment
according to the European Community's
Directive. The attachment's emission is
specified in the Technical data chapter
and on the label.
Note: Other symbols/decals on the product refer to
certification requirements for other commercial areas.
2.4 Special safety instructions
2.4.1 To remove the battery
WARNING: Always remove the battery before
you do repairs or do servicing on the product.
The rating plate shows the serial num-
ber. yyyy is the production year, ww is
the production week and xxxx is the
726 - 002 - 23.01.2020