Safety - Husqvarna 325iR Operator's Manual

(Fig. 6) Direct current.
(Fig. 7)
The product agrees with the applicable
EC directives.
(Fig. 8) This product conforms to the applicable
UK regulations.
(Fig. 9)
Use approved protective gloves.
(Fig. 10)
Use heavy-duty slip-resistant boots.
(Fig. 11) Beware of blade thrust.
(Fig. 12) Symbols on the product or its packaging
indicate that this product cannot be
handled as domestic waste. This product
must be deposited at an appropriate
recycling facility.
(Fig. 13)
The attachment can forcibly throw objects
that can bounce back. This can result in
serious eye injuries if the recommended
safety equipment is not used.
(Fig. 14) Disconnect battery before maintenance.
(Fig. 15) The product has protection against
splashing water.
(Fig. 16)
Keep all parts of your body away from the
hot surfaces.
(Fig. 17) Noise emission to the environment
label as per EU and UK directives
and regulations, and New South Wales
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING:
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
CAUTION:
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
Note:
Used to give more information that is necessary
in a given situation.
1859 - 005 - 21.09.2023
Used if there is a risk of
Used if there is a risk of
legislations "Protection of the Environment
Operations (Noise Control) Regulation
2017". The guaranteed sound power level
of the product is specified in
data on page 21 .
yyyywwxxxx
(Fig. 18)
Note:
Other symbols/decals on the product refer to
certification requirements for other commercial areas.
Product damage
We are not responsible for damages to our product if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.

Safety

General power tool safety warnings
WARNING:
instructions, illustrations and specifications
provided with this power tool. Failure to
follow all instructions listed below may result
in electric shock, fire and/or serious injury.
• Save all warnings and instructions for future
reference. The term "power tool" in the warnings
refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Work area safety
• Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
• Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
Technical
The rating plate shows the
serial number. yyyy is the
production year, ww is the
production week and xxxx
is the sequential number.
The operator must ensure
that no people or animals
come closer than 15 me-
tres. When several oper-
ators are working at the
same site a safety distance
of at least 15 metres must
be in effect.
Read all safety warnings,
9