5.4.6 To install the spring on the power trigger
lockout
1. Attach the spring to the power trigger.
2. Turn the spring rearward.
3. Push the front part of the spring (A) to make the
bend (B) move on the edge of the power trigger
lockout (C).
726 - 002 - 23.01.2020
4. Turn the spring up.
5.4.7 To install the power trigger and power trigger
lockout in a control handle with a digital user
interface
1. Attach the spring to the power trigger.
A
C
2. Put the power trigger in the control handle. Make
B
sure that the power trigger spring is in the correct
position.
Repair instructions - 17